The tune evaluation criteria are benchmarks that GCMS instruments typically pass.
"Designed for" and "works with" are two different things. The tune evaluation was created before the Extractor Source and High Efficiency Source. These ion sources get…
Hello, we were not able to tune the instrument at all. There was so much noise at low mass that it fails the initial quad coarse mass calibration. We think it is PEG contamination, possibly also PPG, but a number of masses correspond with sodiated PEG…
I have a G4226A autosampler with a recurring error message. Movement of needle into seat failed [EE 4714, 3204]
This error started after the autosampler had been repaired by a field engineer. The main board had to be replaced; the computer was unable…
Hey Ryan, try the following. Normally, the valve command failed is coming as a result of the position not found. Overtightened screws are a typical result if you have done maintenance before (happened to me the first time...). Tighten the screws each…
I am trying to quantify ethyl lactate in ethanol 20% (remainder water). When I run multiple injections, the RSD is 6-8% for the ethyl lactate peak. The ethyl lactate standard should be 0.2% v/v. We typically test samples that are 95-100% ethanol and use…
Hi, I am using Agilent 7820A GC-FID with EZChrom Elite v3.3.2. software. After the completion of each sequence, I would like to automatically generate a .text file along .dat file. So far, after the sequence has ended, I process the sequence and then…
Good Evening, I realize this is a bizzare question but basically what we have is a Dean Switch GCMS system and we use cut windows to determine when the best time is to switch from column 1 (inlet to switch to 3rd column - vent) to column 2 (inlet column…
I think that, with this version of the software, there are configuration files stored in the "instrument number folder", e.g. C:\Chem32\n I was going to suggest that you try to delete/rename the config.reg file, having closed all instances of Chemstation…
Hello,
We have an agilent 6545. Today when we are doing a mass calibration check, the masses of the negative tune ions seems to be shifted (For example 1633.9988 is now showing 1639.2109 and so on for the other ions) and mass calibration check seems…
Actually, you have to be sure that it's detector problem or not.
And if still problem persist and after changing lamps intensity test, wavelength test failed again then you have to call to your local agilent support to check electronics and optics etc…
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
AriaMx touch screen displays error code 90 after the Instrument Health Check (IHC), which happens when the AriaMx is switched on, or after running the onboard diagnostic tests...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx optical modules
Issue
AriaMx users can change which AriaMx optical modules are installed to upgrade the instrument capabilities or to troubleshoot.
Items Required
Any...
This Information Applies To: AriaMx real-time PCR system
Issue
Error 43 is displayed on the AriaMx touch screen. Error 43 is a voltage error and it normally indicates that the cartridge LED voltage or motor voltage being detected is abnormal. Sometimes...
This Information Applies To: Agilent 2100 Bioanalyzer system
Issue
Can I run qPCR samples containing Sybr® Green I on the Bioanalyzer?
Background
Sybr® Green I is an Intercalating Dye commonly used to detect amplification products in real...
This Information Applies To: Agilent 4200, 4150 and 2200 TapeStation.
Issue
Is it possible to analyze single stranded DNA (ssDNA) on the TapeStation? Which kit is the most suitable for analysis of ssDNA?
Resolution
Agilent does not offer any...
This Information Applies To: Agilent 4200 and 4150 TapeStation systems
Issue
How to Run the software installation verification on 4200 and 4150 TapeStation systems.
Background
The 4150 TapeStation model G2992A and 4200 TapeStation model G2991B...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, and Femto Pulse
Issue
Perform a capillary alignment when a new array is installed in your Agilent Parallel Capillary Electrophoresis instrument. An alignment may also be performed...
This Information Applies To: Agilent 4200 and 4150 TapeStation
Issue
Are the Agilent DNA and RNA ScreenTape assays denaturing?
Resolution
The DNA ScreenTape assays in the TapeStation portfolio are not denaturing. Only the RNA and High Sensitivity...
This Information Applies To: Agilent LC pumps with manual purge valve.
Issue
A good practice before using a system is to purge the system to remove air. This is done by observing the clear tubing from the solvent bottle as well as the waste line...
This Information Applies To: ICP-MS MassHunter 4.x and 5.x
Issue
Unable to open a batch in offline data analysis, or the batch is empty.
If the ICP-MS MassHunter software closes unexpectedly, there is a power outage, or the ICP-MS and computer...