Hello,
I am not sure as I do not have systems setup that are that old. It would be based on the driver from that version. Do you see the option for serial communication when configuring the HPLC in B.04.03, if not then I would say serial was phased…
HI Arashjafari,
there is a nice overview article here: Chromatographic bioanalytical assays for targeted covalent kinase inhibitors and their metabolites - ScienceDirect
It should work with Poroshell 120 C18, Zorbax RRHD Extend-C18 or ZORBAX Eclipse…
Don't miss our upcoming webinar series in partnership with Dow. We encourage you to join, whether you are an experienced scientist or new to the field, this series is designed to deepen your understanding and provide practical insights.
① Unraveling…
Hello B
I would need to see your workspace to reveal what has gone wrong with the analysis. Please call us at 800-227-9770 with a serial number of your instrument.
Talk to you soon,
Howard
If you're running a custom macro you'll need to talk to whoever wrote it. Those abundances are incredibly tiny. Allowable electronic signal is somewhere around 50 counts, so unless that is background subtracted the only really useful ions there are 269…
The operator is using the requeue batch option from an already run batch instead of creating a new batch. Mass Hunter will append the # in this case. I suggest creating a batch template from your desired method and using that for future batches. This…
Check out our new article titled Calibrating the Low Molar Mass Range in GPC/SEC Using Oligomer Peaks , which has been published in the February issue of the Column . The author is Dr. Wolfgang Radke .
We present our Agilent GPC/SEC portfolio and more at Analytica 2024 .
The World's Largest Trade Fair will take place from 09.-12.04.2024 in Munich, Germany . You’ll find us in hall 2 ( A2.201 ). In addition to equipment and colleagues, there will be…
This Information Applies To: Agilent OpenLab ChemStation
Issue
When launching OpenLab ChemStation Online or Offline session, the following error messages “ ChemStation ChemMain has stopped working ” or " There is a problem with Adobe Acrobat/Reader...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Agilent Femto Pulse, Agilent ZAG DNA Analyzer
Issue: The instrument encounters a run error, Run Aborted, Position fault: Did not reach target Z position ( Figure 1 ) . This error...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG, Oligo Pro II
Issue:
This article explains the steps to take after installing a brand new array in the Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG, and...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer systems, RNA kit (15 nt) (p/n DNF-471-0500/1000), HS RNA kit (15 nt) (p/n DNF-472-0500/1000), Small RNA kit (p/n DNF-470-0275)
Issue
Which kit should be used to analyze single...
This Information Applies To: Agilent 6820, 6890, 7820A GC systems with a Split/Splitless (SSL) inlet
Issue
Non-volatile sample matrix components will accumulate in the inlet liner and impact on analytical performance. The inlet liner should be changed...
This Information Applies To: Agilent headspace samplers (HS)
Issue
GC cycle time needs to be calculated correctly. Too short a GC cycle time will reduce sample quality and possibly stop the analysis prematurely. Too long GC cycle time can cause...
This Information Applies To: Agilent 7820A GC
Issue
7820A GC is designed with simplified keypad that comes with five buttons. They are Stop, Prep Run , Start, Up and Down arrow buttons. Changing the IP address requires a different method compared...
This Information Applies To: Agilent Single Needle Autosamplers
Background
Sometimes the user may observe liquid flowing from Port four on the autosampler injection valve. During an injection sequence, it is normal to have liquid from port four...
This Information Applies To: Agilent 4200, 4150, 2200 TapeStation systems
Issue
Can I run an assay using the ladder or sample buffer from a different assay if I have run out of the appropriate assay ladder or sample buffer? Is it possible to run...
This Information Applies To: Agilent ICP-MS 7700, 7800, 7850, 7900, 8800, and 8900 systems
Issue
Peristaltic pump tubing that has lost its elasticity will not deliver the sample to the nebulizer correctly. When the pump tubing appears limp or flattened...