The Digest of upcoming webinars has been updated as of March 28.
Check Out:
Back to Basics - IN PERSON - Various Dates
Key Considerations for Dissolution Software and Compliance on May 23
Use of LC-MS/MS Technique for Quantitative Analysis of…
Hi Fury,
Are you using Cary WinUV with the CFR Package which uses CRM? There should be someone who has qualified your system and would also have access. You can also, reinstall the software since there isn't that much to the initial setup if you haven…
Locking does not appear to be designed to lock specific methods as it is to lock the app to prevent say Scan or Kinetics to be used by a second account while the first person is using it.
Hi, Using one and the same column for different applications is possible, as long both solvents are permitted (column user manual e.g.).
The column should always be flushed very slowly from solvent A to B (0.1 mL/min). At least 5 times the column volume…
Hi Marty,
Thanks for taking the time to respond. I saved the data to a file and then printed the file and it was properly formatted. I think that there is an issue with printing to paper from the method. Since this is a long unsupported CS revision…
Hi Abbey
Thanks for the info!
So far we have only been running this on various forms of olive oil. But the waves in the baseline remain regardless of MOAH contant. I have run samples that were analyzed by outside labs (with COA) that contain 0ppm…
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer systems, RNA kit (15 nt) (p/n DNF-471-0500/1000), HS RNA kit (15 nt) (p/n DNF-472-0500/1000), Small RNA kit (p/n DNF-470-0275)
Issue
Which kit should be used to analyze single...
This Information Applies To: Agilent 6820, 6890, 7820A GC systems with a Split/Splitless (SSL) inlet
Issue
Non-volatile sample matrix components will accumulate in the inlet liner and impact on analytical performance. The inlet liner should be changed...
This Information Applies To: Agilent headspace samplers (HS)
Issue
GC cycle time needs to be calculated correctly. Too short a GC cycle time will reduce sample quality and possibly stop the analysis prematurely. Too long GC cycle time can cause...
This Information Applies To: Agilent 7820A GC
Issue
7820A GC is designed with simplified keypad that comes with five buttons. They are Stop, Prep Run , Start, Up and Down arrow buttons. Changing the IP address requires a different method compared...
This Information Applies To: Agilent Single Needle Autosamplers
Background
Sometimes the user may observe liquid flowing from Port four on the autosampler injection valve. During an injection sequence, it is normal to have liquid from port four...
This Information Applies To: Agilent 4200, 4150, 2200 TapeStation systems
Issue
Can I run an assay using the ladder or sample buffer from a different assay if I have run out of the appropriate assay ladder or sample buffer? Is it possible to run...
This Information Applies To: Agilent ICP-MS 7700, 7800, 7850, 7900, 8800, and 8900 systems
Issue
Peristaltic pump tubing that has lost its elasticity will not deliver the sample to the nebulizer correctly. When the pump tubing appears limp or flattened...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
AriaMx touch screen displays error code 90 after the Instrument Health Check (IHC), which happens when the AriaMx is switched on, or after running the onboard diagnostic tests...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx optical modules
Issue
AriaMx users can change which AriaMx optical modules are installed to upgrade the instrument capabilities or to troubleshoot.
Items Required
Any...
This Information Applies To: AriaMx real-time PCR system
Issue
Error 43 is displayed on the AriaMx touch screen. Error 43 is a voltage error and it normally indicates that the cartridge LED voltage or motor voltage being detected is abnormal. Sometimes...