Hello Achim_Hongenaert ,
I apologize for the delayed response.
There are a few outliers that can be used for recovery calculations. If this compound is added to all samples then I believe the best option will be to call it a Surrogate in quant, even…
Thank you, Linh, for your information. Given that it is an old machine, I am concerned about the potential loss of data if we upgrade the software. Instead, I will create a shutdown method to be executed at the end of the sequence run.
Hello,
I would like to ask if it is possible to execute the command "Created Compound from Each Selected Spectrum" in version B.10.0 of the Agilent MassHunter Qualitative Analysis software. This command is available in version B.07.00, but not in version…
Did you remove the diffusion pump, take it apart, empty the contents completely, wash them all with something like toluene, reassemble it with new diffusion pump fluid filled only to the top of the "cold" mark - if you didn't take it all apart and any…
Hello. Thank you howard_sanford for that answer! I talked to an Agilent technical representative and he came up with the same solution. But, we have the B.07.06.2704 version of Masshunter. What would be the data path for those files in that case? I am…
Dear juju,
Sorry to tell you, that single UV spectra extraction at a certain wavelength for each peak is not feasible within bio-SEC Software.
B rgds,
Anne
Hi,
Unfortunately, I cannot clarify the error message and the cause in this forum, so I would ask you to contact your responsible customer support. A ticket can then be opened with a detailed description including the log files so that the software…
The Digest of upcoming webinars has been updated as of June 28.
Notable additions include:
Cancer Research (1)
OMICS (1)
Check Out:
Elemental Analysis in Yeast Cells and Microplastics by ICP-MS with Automated Micro-Flow Sample Introduction…
This Information Applies To: Agilent 6820, 6890, 7820A GC systems with a Split/Splitless (SSL) inlet
Issue
Non-volatile sample matrix components will accumulate in the inlet liner and impact on analytical performance. The inlet liner should be changed...
This Information Applies To: Agilent headspace samplers (HS)
Issue
GC cycle time needs to be calculated correctly. Too short a GC cycle time will reduce sample quality and possibly stop the analysis prematurely. Too long GC cycle time can cause...
This Information Applies To: Agilent 7820A GC
Issue
7820A GC is designed with simplified keypad that comes with five buttons. They are Stop, Prep Run , Start, Up and Down arrow buttons. Changing the IP address requires a different method compared...
This Information Applies To: Agilent Single Needle Autosamplers
Background
Sometimes the user may observe liquid flowing from Port four on the autosampler injection valve. During an injection sequence, it is normal to have liquid from port four...
This Information Applies To: Agilent 4200, 4150, 2200 TapeStation systems
Issue
Can I run an assay using the ladder or sample buffer from a different assay if I have run out of the appropriate assay ladder or sample buffer? Is it possible to run...
This Information Applies To: Agilent ICP-MS 7700, 7800, 7850, 7900, 8800, and 8900 systems
Issue
Peristaltic pump tubing that has lost its elasticity will not deliver the sample to the nebulizer correctly. When the pump tubing appears limp or flattened...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
AriaMx touch screen displays error code 90 after the Instrument Health Check (IHC), which happens when the AriaMx is switched on, or after running the onboard diagnostic tests...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx optical modules
Issue
AriaMx users can change which AriaMx optical modules are installed to upgrade the instrument capabilities or to troubleshoot.
Items Required
Any...
This Information Applies To: AriaMx real-time PCR system
Issue
Error 43 is displayed on the AriaMx touch screen. Error 43 is a voltage error and it normally indicates that the cartridge LED voltage or motor voltage being detected is abnormal. Sometimes...
This Information Applies To: Agilent 2100 Bioanalyzer system
Issue
Can I run qPCR samples containing Sybr® Green I on the Bioanalyzer?
Background
Sybr® Green I is an Intercalating Dye commonly used to detect amplification products in real...