Hello,
No, you cannot create custom sample types in CDS. You can use an existing field like sample label to mark specific injections if you need more delineation than the sample types can provide.
Marty
Hello,
To check if you have access to a core facility in iLab, log into your iLab account and navigate to the core facility's page. If you are not prompted to request access and can view sections such as “About our Core,” “Request Services,” or “Schedule…
Hi Sabbas,
if you have measured a batch and click the print button, all method parameters are shown in the report. I’m not sure if you can print the report of method solely without having measured a sample. I would in that case just measure a blank…
Here a list of suggestions to try if encountering an error 155 on ELSD:
Make sure driver is at least A.01.07 DU1. Along with that, make sure the firmware and software is compatible with the driver.
Consider lowering the data rate (40 Hz if this…
As " alfausett " said, in case of headspace much depends upon sample matrix along with other factors. Honestly i am bit surprised that you are fine when injecting as liquid. In case of the liquid majority have issue with acetic acid peak shapes at some…
It all depends how old is your column or how it is handled when not in use. This is pretty much normal with majority of the columns when used in temperature programming. Some vendors claim to provide "zero bleed" columns but honestly there are many if…
The Digest of upcoming webinars has been updated as of March 7.
Notable additions include:
Atomic (1)
Automated Electrophoresis (1)
Chromatography and Mass Spec (12)
Vacuum Solutions Series (3)
Check Out:
The Analysis of Petroleum…
This Information Applies To: Agilent 5000 Series ICP-OES Instruments
Issue
The spectrometer incorporates interlocks and covers that are used to monitor critical operations to ensure Operator and instrument protection. If the instrument is used in...
This Information Applies To: Agilent ICP-OES Systems (700 Series, 5000 series)
Issue
If any yellow or orange coloration on any part of the torch is observed (not due to the sample being presented or recently run) or if the torch appears to be visibly...
This Information Applies To: Agilent 700 Series ICP-OES Systems
Issue
The 700 Series ICP-OES requires regular maintenance, and routine maintenance tasks are able to be performed by the instrument operator.
Any maintenance procedures not...
This Information Applies To: Agilent 5000 Series ICP-OES (5100/5110/5800/5900)
Issue
Correct ventilation is required to ensure proper function of the ICP-OES.
Resolution
The ICP-OES must be located under a flue that is vented by an exhaust...
This Information Applies To: Agilent demountable torches
Issue
The Agilent 5000 series ICP-OES instruments can be fitted with a demountable, semi-demountable, or bonded torch. The demountable and semi-demountable torches can be disassembled for...
This Information Applies To: 5100, 5110, 5800, and 5900 ICP-OES instruments
Issue
The ICP-OES operator can identify the source of plasma ignition failure. The main cause is air entering the plasma.
Steps to follow
Excessive air entering...
This Information Applies To: Agilent ICP-OES 5000 Series (5100/5110/5800/5900)
Issue
How to run the ICP-OES Performance Test after installation, preventative maintenance, repairs, and when troubleshooting.
Steps to Follow
The ICP-OES Performance...
This Information Applies To: Agilent 5000 Series ICP-OES
Issue
Blocked nebulizers are the source of many instrument performance issues including loss of sensitivity and poor precision, especially when running organics, high solids, or high salt...
VGA Setup
Multiple Results
This Information Applies To: Agilent VGA 77 (Vapour Generation Accessory)
Issue: This article discusses the setup steps for the VGA 77.
VGA 77
Warning : Noxious Fumes and Corrosive Liquids. Vapor generation methods of analysis involve...
This Information Applies To: Agilent VGA 77 Accessory
Issue: The Agilent Vapor Generation Accessories use high concentrations of HCl and require thorough cleaning to maintain optimum working condition.
Warning : The Vapor Generation...