Hi hennindm, Congrats on your 8890 purchase! The new GCs are designed to be used both in local settings with a computer near the instrument, and remotely, so the best fit was to build the data access into a workflow that permitted both, aka the browser…
"No Emission Current" -- This message just says that the filament is not working.
Wait long enough after pumping down. Don’t turn on the MS to just ‘take a look’ to see how the pump down is going. The residual oxygen damages the filament immediately…
Hello I am using Chemstation version B.04 and I recently found the mentioned macro. However, it does not seem to properly work. First, it failed at the Revision, therefore I took a look at macro file and found out supported versions were only previous…
Hi, Thank you for your replies. We had some assistance by email from Agilent and we checked several points. We changed the EM horn and cleaned the HED. The clip that holds EM horn seemed to be fine. We also ran several tests from the Lab device toolkit…
You can program a gradient to go to 100%B in theory. The BPR control will not be great at 100% co-solvent but its possible. However, I have not seen an application which requires more than 50% MeOH, EtOH or IPA co-solvent. Maybe others on here have specific…
Martin, I have run into one more problem. In order to display the compound as a percentage, I also need to get the average of another field, but this one is a custom field( "Sample Weight/g") . I tried using the same query that you created to get the…
Hello, I updated the tags on this post to increase visibility. The first thing I would recommend would be to run the Software Verification Tool (might be called the Installation Qualification Tool or IQT in your revision) found by going to Start>All Programs…
Hello, If you want to approach this from an intelligent report angle, then you can set up a Pass/Fail flag on a Sequence Summary Report using the IIf() function. The tricky part would be to make sure that the logic in the Pass/Fail expression is referencing…
Hi Kristen, Thanks for the speedy reply and links, really useful. Everything parts wise appear OK. The ALS syringe (5ul gold syringe barrel ( 5182 0836) with 0.32um 26-32/42 cone needle (5182-0831)) is listed under 7673/7683 On Column autosampler syringes…
This Information Applies To: 4200, 4150 and 2200 TapeStation, TapeStation analysis software A02.02 or higher.
Issue:
When using the Agilent 4200, 4150 and 2200 TapeStation systems, the DV 200 of FFPE RNA samples can be calculated within the TapeStation...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, ProSize Data Analysis Software
Issue
How to export a ladder as a size calibration file and import it into a different run in ProSize.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
It is possible to set up the 2100 Expert software so that the files are automatically exported each time a chip run is complete.
Steps to Follow
To turn...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue:
How to identify and troubleshoot late migration of the ladder, marker, and sample peaks in data generated on the Agilent 2100 Bioanalyzer system.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
If communication between the 2100 Bioanalyzer and the PC cannot be established, or if an intermittent communication loss occurs, follow the instructions in...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
Instructions on how to import from or export data into LIMS software.
Steps to Follow
Data import
When importing sample names and sample comments from...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software version B.02.08 or later
Issue
When printing a report to PDF or HTML with the 2100 Expert software, the error "Failed to Generate Report" appears.
Background
This error...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue
Resetting upper or lower markers from their automatically assigned settings in the Agilent 2100 Expert software.
Background
The Agilent 2100 Expert software...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert Software
Issue
Samples with a broad signal such as NGS smears should be analyzed by setting up a region. Analyzing a region is also termed smear analysis.
Steps to Follow...