Hello, you can export sequences into a new project file.
- Select a sequence of a loaded project and click Export data in the [project management] window.
- The now open window allows you to select more sequences from this project to export (see…
Depending on the software, linear and/or polynomial regression models are supported. Strictly speaking, linear fits can only be used for linear columns. However, it is also observed here that a polynomial fit may be more suitable depending on the column…
As you have already mentioned, HFIP is a very aggressive solvent that has a high density at a low boiling point.
Note that only the external degassers G1322/G7122 are compatible with HFIP. HFIP analyses are usually run with KTFAc as a salt additive…
Hello,
Typically, it is difficult to determine the issues with AV and security software within the logs. You could look into the acquisition server logs around the time the crash happened. I would also look at the windows event logs for other activity…
The Agilent TRS100 Quantitative Pharmaceutical Analysis system has been certified with My Green Lab’s ACT label in the EU, UK, and US. This clear, third-party verified information about the system’s environmental impact makes it easy for laboratories…
The phenomenon you describe is inevitable for broad polymer samples: The signal intensity (SI), of all detectors depends on injected mass (concentration and injection volume), a sample related constant k Sample (i.e., response factor), and a detector…
Hi,
In your case, the path of the column database must be adjusted. This is done as follows:
1) Close WinGPC software 2) Search registry editor (Windows logo key + "regedit") and run it as administrator (possibly involve your IT department) 3) Find…
This Information Applies To: Agilent 4200 TapeStation 4150 TapeStation, TapeStation controller software
Issue
The system verification can be run to check the TapeStation performance, for example, when you suspect an instrument hardware fault.
...
This Information Applies To: Agilent 4200 and 4150 TapeStation software.
Issue
How to uninstall and reinstall the 4200 and 4150 TapeStation software.
Background
An uninstallation and reinstallation of the TapeStation software should be performed...
This Information Applies To: 2200 TapeStation instruments, 2200 TapeStation controller software
Issue:
The Agilent 2200 TapeStation controller software won't launch but displays the correct serial number in the top-right corner of the loading screen...
This Information Applies To: 4200, 4150 and 2200 TapeStation, TapeStation analysis software A02.02 or higher.
Issue:
When using the Agilent 4200, 4150 and 2200 TapeStation systems, the DV 200 of FFPE RNA samples can be calculated within the TapeStation...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, ProSize Data Analysis Software
Issue
How to export a ladder as a size calibration file and import it into a different run in ProSize.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
It is possible to set up the 2100 Expert software so that the files are automatically exported each time a chip run is complete.
Steps to Follow
To turn...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue:
How to identify and troubleshoot late migration of the ladder, marker, and sample peaks in data generated on the Agilent 2100 Bioanalyzer system.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
If communication between the 2100 Bioanalyzer and the PC cannot be established, or if an intermittent communication loss occurs, follow the instructions in...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
Instructions on how to import from or export data into LIMS software.
Steps to Follow
Data import
When importing sample names and sample comments from...