Hello,
As I said in a previous post, the sample prep method object and field items were added in CDS 2.7 to the available report objects. It looks like from your screenshot you have CDS 2.5 installed so those will not be options.
Marty
Saturation is reported by ion, not by TIC abundance.
The maximum possible abundance per ion on SQ instruments is approximately 8.4 × 10^6. To stay within the linear range of the electron multiplier it is recommended to be <= 2.0 × 10^6 per ion.
Please…
The file is a pre-set qPCR program to run a plate filled with water used to test the basic raw fluorescence signal of AriaMx Optical modules.
File required for Performing a Background Calibration
The GC cycle time should be the time from injection until the GC is ready to run again. This includes the analysis run, cool down, and equilibration. Based on the times you listed, it would be roughly 40 minutes. It may be worth timing to make sure. The…
Hi howard_sanford, my apologies for a slow response, but thank you very much for the help and advice. I was able to get the filter for Cal and CC to work, and I appreciate the discussion of my larger problem. I think I'm probably several (many) steps…
Hello, thank you for your help. I had tried loading different processing methods but I didn't realize the results were not linked to any method. It turns out the result files were read-only and could not be linked to any method. I moved the result files…
This Information Applies To: Agilent 7890 A/B, 8860 and 8890 GC Systems with Split/Splitless (SSL), Multimode (MMI) or Programmable Temperature Vaporization (PTV) Inlets
Issue:
The Inlet Leak & Restriction Test is executed after every inlet maintenance...
This Information Applies To: 5000 series ICP-OES (5100,5110,5800,5900), AVS 4/6/7, ICP Expert version 7.X
Issue
The AVS can contribute to instrument performance issues such as sensitivity and precision. During troubleshooting, bypassing (or skipping...
This Information Applies To: Agilent GC Systems
Issue
Loss of peak resolution can be a combination of decrease in separation and increased peak width. Loss of resolution can impact on analytical reproducibility and accuracy.
Other chromatographic...
This Information Applies To: Agilent GC Systems
Issue
Contamination that creates ghost and carry over peaks can be introduced at different points including sample preparation, introduction, and separation. The additional peaks can cause false positive...
This Information Applies To: Agilent GC Systems
Issue
Several problems can be identified in GC chromatograms, and each of these problems can have various different sources.
Regular maintenance of your instrument in accordance with the recommended...
This Information Applies To: Agilent OpenLab CDS software
Issue
This article describes how to troubleshoot initialization errors during start of OpenLab CDS Data Analysis software. These troubleshooting steps will recreate the OpenLab CDS user.config...
This Information Applies To: Agilent SIPS 10/20 and Flame AA
Issue
Replacing and conditioning the SIPS pump tubing.
Background
Whenever new pump tubes have been installed, it is necessary to condition the tubing before the analysis to prevent...
This Information Applies To: OpenLab CDS software versions 2.1 to 2.5
Contents
This article describes how to process a calibration with disabled calibration points in OpenLab CDS software versions 2.1 to 2.5.
Background
In OpenLab CDS software...
This Information Applies To: OpenLab CDS version 2.6 or later.
Contents
This article describes how to process a calibration when some calibration points have been disabled, using OpenLab CDS software version 2.6 or later.
Background
In previous...
This Information Applies To: Agilent OpenLab CDS
Issue
Outlining the step-by-step instruction on how to integrate peaks using Integration Events in Processing Method.
Background
Integration locates the peaks in a signal and calculates their...