You do this with a Restek column! You cannot get a better resolution by changing just parameters with this cphase. You need a different selectivity to have a chance, maybe use a DB-WAX UltraInert.
For glucose a 87H type is ok as it uses Ion Exclusion Chromatography for the separation, the phases contain benzenesulfonic acid group (and will interact with anions in ion exchange mode). Phosphoric acid does not interact with sulfonic acid groups as…
thanks for sharing the information. It saved my day. But to delete the mentioned file I had to call helpdesk to grant me permission. No way to delete with my regular credentials.
Agilent offers these two services for the IDP-7 Dry Scroll Pump: 1. The Agilent Rapid Exchange Service replaces your pump with a refurbished one • You can send your unit back (exchange) once the replacement unit arrives • Warranty period is 1 year from…
hello,
How to use the Add-ins Blank substraction in Mass Hunter V10.1 without a calibration curve? It seems like it is not possible without a calibration curve but I'm doing semi-quantitative work so I don't have a calibration curve.
Will that feature…
Hello afzishle ,
I'm not aware of any issues with PDF reporting. For troubleshooting I would try manually printing the report with preview enabled. That should give you some idea if it is an issue with saving the file or just report generation.
Hello,
The test and measurement equipment went to Keysight when it was spun off from Agilent in 2014. You would need to check with Keysight for information on that product.
Marty
Agilent Technologies, Inc. - Agilent Technologies Spins Off Its…
This Information Applies To: Agilent OpenLab ChemStation Edition Software (C.01.xx)
Issue
When your Agilent OpenLab ChemStation Edition software fails to launch with errors " Login failed with the following message: Configuration system failed to...
This Information Applies To: Agilent OpenLab ChemStation Edition Software (C.01.xx)
Issue
Agilent OpenLab ChemStation Edition software fails to launch with error containing the words " Autostart Macro failed ”. This article will provide you some...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer and Oligo Pro II instruments, and their respective controller software.
Issue Failed to build pressure error comes up shortly after starting a separation...
This Information Applies To: Agilent 6400 Series triple quadrupole LC/MS systems equipped with a gate valve.
Issue
Removing the Ion Transfer Capillary for maintenance on instruments with gate valve. The gate valve allows ion capillary removal and...
This Information Applies To: Agilent OpenLab ChemStation, Agilent OpenLab CDS, Agilent OpenLab EZChrom
Issue
Due to the license error “ An error occurred connecting to the license server: The desired vendor daemon is down. Check the Imgrd log file...
This Information Applies To: HPLC Advisor app
Issue
Legacy HPLC method needs to be translated to a new column or LC system (HPLC to UHPLC or Analytical to Preparative LC).
Requirements
Install the most recent version of the HPLC Advisor...
This Information Applies To: Agilent 7890 A/B, 8860 and 8890 GC Systems with Split/Splitless (SSL), Multimode (MMI) or Programmable Temperature Vaporization (PTV) Inlets
Issue:
The Inlet Leak & Restriction Test is executed after every inlet maintenance...
This Information Applies To: 5000 series ICP-OES (5100,5110,5800,5900), AVS 4/6/7, ICP Expert version 7.X
Issue
The AVS can contribute to instrument performance issues such as sensitivity and precision. During troubleshooting, bypassing (or skipping...
This Information Applies To: Agilent GC Systems
Issue
Loss of peak resolution can be a combination of decrease in separation and increased peak width. Loss of resolution can impact on analytical reproducibility and accuracy.
Other chromatographic...
This Information Applies To: Agilent GC Systems
Issue
Contamination that creates ghost and carry over peaks can be introduced at different points including sample preparation, introduction, and separation. The additional peaks can cause false positive...