Thank you for your reply. I have not worked much with Gas GCs and I am not that familiar with different parts of it. I have performed leak check around front inlet and inside oven compartments (around columns). There was no leak. Could you please show…
Hi.
So ive had a very high sample with Methanol (around 8000 mg/l) and now i still have contamination around 500 mg/l in my blanks. Ive tried injecting IPA and replaced the syringe. Any other tips? Ive also pumped up the oven/column tempature to a…
Hi Marty,
Thank you very much for your answer. The "currentSignal.GetDoubleCC("TotalAreaAdj") does not give any value. Instead, I have used just " TotalAreaAdj" and it works. the final equation is "Peak_Area/TotalAreaAdj*100".
I really appreciate…
I am also interested in the question of compatibility of the existing power supply G 1946-80058/B with different models of the 6100 line: 6125, 6135, 6120, 6130? In general, there are more questions than answers and I’m afraid that without clear instructions…
This is normal as PONA columns are apolar phases with thin films. For your light HC's < C5 either a thick film (ca. 5 µm) or another phase/column would help, but higher HC's cannot be done then (see also Lance's answer). It's either switching or backflushing…
Are you running different methods in different worklists, or are the worklists all running the same method? I assume the same method across worklists, but this is not clear in your question.
Does this change in pressure lead to a change in your quality…
Hi Danielchsny, Yes power spikes from unscheduled power interruptions can cause damage to sensitive electronic circuits. Another contributing factor is that when power is lost to the LC/MS running under high vacuum the rough pump will stop, causing a…
How to Create a New Database in Spectroscopy Database Administrator (SDA)
Multiple Results
This Information Applies To: Spectroscopy Database Administrator (SDA)
Issue
If the old database is full, or after a specific time interval, it is necessary to create a database in SDA. If you receive a message telling you that the database is full...
Update Database Group Path in Spectroscopy Configuration Manager (SCM)
Multiple Results
This Information Applies To: Agilent Spectroscopy Configuration Manager (SCM)
Issue
It is necessary to add a database to a group path in SCM after creating a new database in Spectroscopy Database Administrator (SDA) . If access to an older database...
How to Access Spectroscopy Database Administrator Software (SDA)
Multiple Results
This Information Applies To: Agilent Spectroscopy Database Administrator Software
Issue
The SDA application can only be accessed by a Windows user who is a member of the Windows Administrators group and Windows SDAAdministrators group.
Steps...
This Information Applies To: AriaMx real-time qPCR system
Issue
The instrument fails to reach the required temperature during a run.
Resolution
Check if the temperature of the environment around the instrument is too low resulting in the instrument...
This Information Applies To : Agilent ELSDs G4260A, G4260B, G4261A, G4621B, G7102A, G7102B
Content :
If the evaporator tube of ELSD becomes contaminated with nonvolatile material resulting in poor chromatography, please use the procedure in this...
This Information Applies To: Agilent ICP-MS (7800/7850/7900/8900)
Issue
The oil should be replaced at least once every six months, or when the oil color is indicates it needs to be changed . The foreline pump should be checked monthly. This article...
This Information Applies To: Agilent ICP-MS MassHunter versions 4.4 - 4.6 and 5.x.
Issue
After performing an autotune, the batch tune report will not generate or print.
Background
ICP-MS MassHunter uses an application called ICP-MS Data Analysis...
This Information Applies To: Agilent 6400 Series triple quadrupole LC/MS systems equipped with a gate valve
Issue
Installing the Ion Transfer Capillary after cleaning or replacement in Agilent LC/MS instruments with a gate valve.
Required Items...
This Information Applies To: Agilent OpenLab CDS 2.x
Issue
This article outlines the procedure on how to quantify uncalibrated compounds in OpenLab CDS 2.x. using reference compounds in the processing method compound table.
Background
Uncalibrated...
This Information Applies To: Agilent OpenLab CDS 2.x
Issue
This article outlines the procedure on how to quantify the uncalibrated compounds in OpenLab CDS 2.x when the analytical method requires a fixed response factor.
Background
Uncalibrated...