Hi
Check ALS and MS are ready or not..If ready and still problem then check cable from backside of GC as well as check cable communication hub( if used )..
You can also check this article in the Agilent Knowledge Portal: Agilent OpenLab ChemStation Autostart Macro Failed Error - Chromatography Software Articles - Chromatography Software Portal - Agilent Community
I'm using Agilent LC-MS/MS 6490 for multiresidue pesticide analysis. I'm having an issue where sometimes the instrument would not run the sequence and goes to idle (not always, but it can happen in the middle of sequence). The error is "Failed to download…
using ChemStation for HPLC 1260 infinity. Get the "ChemStation failed to initialize and will shut down" error. Already tried renaming the user.config file and it still did not work. any help would be appreciated. using Windows 7 ryoboyle thanks!
I remember hearing about a big cost saving in air / hydrogen when the 6890 came out.. There was no way to shut off the 5890 gc gaases at the end of a run. I think it was about 5000 a year if you shut off the air / h2 / makeup gas at the end of the run…
Hi there, had the same problem after the winter holidays. Nothing had been changed in the system at all. The solution was THE FIREWALL. After i checked the "trust this network connection" in my Antivirus software it started with no problems.
Hey First you need to Restart all Agilent Services, and TCP/IP and also set windows update on disable mode..
Then Reconfigure the instrument...
It should work..
I tried it too..
If this will not work you can check logs C:\Program Data\Agilent…
When I clean the local where the sample is placed and ask him to collect the background, the following message appears: "The clean check has failed. Please ensure these is no sample on the sensor and that it is open. Do you want to override the clean…
This Information Applies To: Agilent Liquid Chromatography (LC) systems
Issue:
Shutting down the HPLC for a long period requires following this general procedure to prevent damage to the system and the column.
Steps to follow:
Store the...
This Information Applies To: Agilent G7129A/B Autosampler with Sample Thermostat/Cooler G7167-60101 or G7167-60005.
Issue:
The autosampler may stop working from time to time, potentially giving off loud noises and switching off the light. The only...
This Information Applies To: Agilent 5977A/B GC/MSD with EI source, EI Extractor Source, or CI Source.
Issue:
During normal operation of the GC/MSD, the source will require cleaning. It is time to clean the source when:
There is a loss in analyte...
This Information Applies To: Agilent HES source, Agilent 5977 Series GC/MSD
Issue:
During normal operation of the GC/MSD, the source will require cleaning. It is time to clean the source when:
There is a loss in analyte response not improving...
This Information Applies To: Agilent 5977 and 5975 Series GC/MSD systems
Issue
The autotune fails and reports the error Tune action stopped: Gain and offset = 0 and peaks are too narrow!
Resolution
The MSD autotune program is run after routine...
This Information Applies To: Agilent ICP-MS systems (7700/7800/7850/7900/8800/8900)
Issue
Condition new or cleaned ICP-MS skimmer cones and sampler cones by aspirating a Conditioning Solution before use.
Background
Drift up can be a sign of...
Turn On the GC/MS Interface and Oven Using OpenLab CDS
Multiple Results
This Information Applies To: Agilent GC/MS instruments controlled by OpenLab CDS software
Issue
Turning on the GC/MS interface heater and Oven using OpenLab CDS software.
Steps to Follow
From the Home tab, click Method > Instrument Setup...
This Information Applies To: Agilent ICP-MS systems (7700/7800/7850/7900)
Issue
The signal monitor function in MassHunter can help with troubleshooting low sensitivity, carry over, contamination, or high background. It can also be used to optimize...
This Information Applies To: Agilent UV detectors (Variable Wavelength Detectors, Multiple Wavelength Detectors, and Diode Array Detectors)
Issue
Checking accumulated hours on the UV lamp.
Steps to Follow
There are four ways to check the accumulated...
This Information Applies To: Agilent 7700/7800/7850/7900/8800/8900 ICP-MS
Issue:
Poor internal standard (ISTD) mixing can cause high relative standard deviation (RSD).
The recommendations in this article are applicable if:
It takes a long...