Hi Martin,
How would I go about using conditional formatting for the Area P/F field to color the field green for Pass and Red for Fail? I'm not quite sure what type of exprssion to use.
This look like it's only bad tuning parameters. Try to have another tune file for EPA. Also, you are doing dilution with EPA. You should start with the wizard method to see if you can fix this. it has the tuning parameters. You don't need to perform resolution…
You can expand the details of the error message. This could indicate a problem with the HDMI cable. It might need to be replaced or reseat. If you have the details of the error that could help.
Hello,
From the error code this look like error 5 with red light 2 and 4 on. Axis movement failed. Either something is blocking the X movement or there is a problem with the sensor. This will require repair. Please call the response center to get…
The main error is 1220. you have to focus on this. The other error are consequence of 1220. Make sure you don't use higher than 10% IPA or it will clogged the cones. You need Argon/Oxide mix to remove the carbon from the cone tips if you use organic solvent…
Hello,
Help about to know what version you have. If it's masshunter you have the option to export with transposition. Or menu file, export. I can't recalled the ChemStation revision has everyone was upgrade to latest version of 7500 software. B.01…
Lithium-ion batteries (LIBs) have emerged as indispensable power sources in a range of applications. With the steep rise of LIB production (and recycling) comes the need for rigorous quality testing of the components used in these batteries.
The Agilent…
Thank you very much.
We actually monitor mass 56 (among with others) at the beginning of each session because mass 56 counts start at around 30-70 K (skipping warm up, just when the plasma lights up) and go down till ~500 counts in around 20-40 minutes…
For WinUV 5.1.3.1042 SCM has an E-sign option, which says to go to the profile screen which does not have 'Authorize Worksheet' and 'Review Worksheet' Privileges to select….Kind of a wild goosechase.
Click 'Configuration > Electronic Signature' to access…
This Information Applies To: Agilent ICP Expert software.
Issue
The software version is often asked and is a valuable information: to see if any updates are needed, if certain options are available etc.
Steps to Follow
Launch ICP Expert...
This Information Applies To: Agilent OpenLab CDS
Issue
This article provides step-by-step instructions to calculate peak-to-valley ratio in OpenLab CDS.
Background
The peak-to-valley ratio is calculated to indicate the quality of peak separation...
This Information Applies To: Agilent 6500 Series Q-TOF LC/MS systems, MassHunter Workstation 10.1 or below and MassHunter Workstation 11.0 .
Issue
Fully reset the Q-TOF LC/MS system via a power cycle without venting. For users who experience slow...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, and Oligo Pro II systems
Issue
The volume of sample used by Agilent parallel capillary electrophoresis systems during a run.
Resolution
The...
This Information Applies To: Agilent 2100 Expert software, 2100 Expert Security Pack, 2100 Bioanalyzer
Issue
When opening the 2100 Expert software and using the Security Pack, the error message " Start of launcher application failed - The requested...
This Information Applies To: Agilent 6890, 6850, 7890, 8890, 8860, Intuvo 9000 GC systems.
Issue
The exchange of the ignitor in a Flame Photometric Detector (FPD) may be required in the following scenarios:
Preventive or periodic maintenance...
This Information Applies To: Agilent 1290 Infinity Quaternary Pump G4204A, 1290 Infinity II Flexible Pumps G7104A/C, and G7131A/C.
Issue
If the flexible/quaternary pump does not generate flow or build up pressure, it could be due to a stuck inlet...
This Information Applies To: Agilent 5200, 5300 and 5400 Fragment Analyzer systems
Issue
Separation times for the Fragment Analyzer for each array format and kit.
Resolution
Caution : The times in this article are the length of time...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, Oligo Pro II, ProteoAnalyzer systems
Issue
Guidance for installing the Agilent parallel capillary electrophoresis instrument controller and/or...
This Information Applies To: OpenLab CDS (version 2.x) system
Issue:
This article explains how to export OpenLab CDS 2.x data as Archived file.
For copying OpenLab CDS 2.x data to another Projects or another OpenLab CDS systems, you can use data...