Agilent GC Knowledge Portal
The Agilent GC Knowledge Portal provides you with easy access to current operation, maintenance, best practices and troubleshooting information. Articles on the portal are produced through collaboration with Agilent experts…
Agilent GC Columns and Supplies
Things to consider:
Did you purchase additional required install supplies from Agilent, or will you be providing your own?
Did you purchase sufficient supplies to begin normal operations of the instruments?
Did…
Methods and Application Resources
Agilent YouTube
Recorded Webinars
Customer Education
CrossLab Method Services
Partner with Agilent CrossLab to accelerate productivity, and design the outcome you want to achieve. Our global team of…
Agilent Intuvo 8850 Gas Chromatograph e-Introduction GC-xxxxx-xxxx (Available soon)
A free self-paced tutorial that introduces tasks required to operate the Agilent Intuvo 9000 GC. It is recommended that you complete this 1-hour training prior to the…
The Introduction Service if purchased includes the following:
Customer guidance to reconfigure the GC from checkout to intended use, including a single injection of a QC standard for the desired method. In the absence of a pre-existing method, the…
The Installation Service if purchased includes the following:
Connection of your existing gas supply to your new equipment. Gas supply may include tanks with regulators, generators placed in proximity to your new equipment, or access ports of existing…
Customer Responsible Site Preparations
Site Preparation Checklist and Site Preparation Guide
Ensure that the appropriate installation hardware has been acquired.
Ensure that the location in which the GC system is being installed meets the requirements…
Typical communication with Agilent activities:
Order Acknowledgement email.
Order confirmation (Thank You) email. Customer can access My Orders Account to track the status of the order.
Ship notification email.
Communications from Consumables…
Hello
I need to do an LC/MSMS method for quantification on a compound that doesn't ionize into [M+H]+ (barely observed) but only into [M-H2O+H]+
Is there a problem with doing MS/MS on a [M-H2O+H]+ parent ion ?
(PS: negative ionization is not an…
Hi again Raina,
as I already told you this cannot be done with just one column, especially with the CO2 concentration up to 20% and water included and the necessity to analyze H2. This is an application we normally build an analyzer for. You need at…
This Information Applies To: Agilent MassHunter 11 and later
Issue
Generating Acquisition Desktop and Quantitative Analysis shortcuts.
Steps to Follow
Double-click the Control Panel icon on the desktop or select Windows Start menu > Agilent...
This Information Applies To: Agilent MassHunter Workstation for LC/TQ and MassHunter Workstation for LC/TOF and LC/Q-TOF
Issue
How to view the MassHunter Data Acquisition Software Logs entries, change settings, and export the Logbook for archiving...
This Information Applies To: ICP-MS MassHunter with User Access Control (UAC)
Issue
It is necessary to update the database folder path in Change User Access Control:
After creating a new database in SDA with ICP-MS MassHunter.
To view a batch...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Over time, the electrodes may become pitted or eroded and users may see a decrease in precision or begin to experience the "Tube fault" error when new tubes are installed. If...
This Information Applies To: Agilent GTA Furnace and Flame Instruments, Agilent 240FS/240GFAA/GTA120/PSD120
Issue
There may be occasions when users need to remove GTA furnace center block workhead (instruments with both Flame and Furnace capabilities...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
The shroud should be replaced annually, or when there is evidence of damage caused by mechanical shock or contamination from liquid spillage.
Items Required
Shroud Removal...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Before replacing the electrodes and/or shroud, the GTA Furnace workhead will need to be disassembled. After replacing the electrodes and shroud, the GTA Furnace workhead will...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer
Issue
After starting a run, the run is aborted with the following error: Current = 0.0uA, Expected range: 5 - 3000.
Steps to Follow
Check...
This Information Applies To: Agilent OpenLab CDS 2.x in file system configuration
Issue
Sometimes, you will need to change the Projects Root Path / Project Storage Path . This article outlines the procedure on how to change it.
Background
...
This Information Applies To: 5000 series ICP-OES (5100,5110,5800,5900), AVS 4/6/7
Issue
Steps to bypass the AVS to troubleshoot poor performance on the ICP-OES
Tip : These steps should be completed after the Subsystem Communication...