Hi,
I am having trouble with carryover peaks in baseline in my 7890B GC with micro-ECD detector. To be specific, the baseline shows kind of a s-shaped just right before our peak of interest begins to appear which interferes with the peak shape.
A…
Hello Marty,
We decided to re-install Chemstation software on a newer Dell Optiplex computer. This worked! So we are back in business! Our LC is now allowing all lab analysts to log back into Chemstation after it times out from inactivity.
Thank you…
您好,Agilent Community是不提供中文服务的。如果您是中国用户,欢迎拨打安捷伦中国的服务热线 座机800-820-3278,手机400-820-3278。或者通过安捷伦官方服务微信小程序咨询相关问题
Hello, the Agilent Community does not provide Chinese services. If you are a Chinese user, please call Agilent China's service hotline 800-820…
Overloading and too high a signal are slightly different. Inlet, column, ion source, and electron multiplier overload can happen even if the maximum signal output is less than the 2x10^6 recommended highest ion signal. Peaks that are too big cause issues…
Good day. What is the best way of protection сystine during acid hydrolysis? I have used the most of preservatives such as: citric acid, phenol. decrease hydrolysis time. No one mentioned above give results. Also I am interested in tryptophan sample …
In that acqmeth.txt file...the column flow setpoints for both columns are set to "Off" ? Please make sure that both are checked ON and save the method.
They don't say the control type - Constant Flow is typical. What version of MassHunter Acquisition…
Hello,
The newer CDS 2.x software does not have that ability to run partial sequences into the same result set as Chemstation did in the past. Also, the new software does not have a single online session per instrument. If a second users needs to…
Hi James,
I am having sort of similar issue as nbrow12 has had 4 years ago. My system is a 7890A GC. I am getting PCM C flow shut down. I did a leak check around inlet, no leak was detected. I can not find out solution on my own. Please advise. Thanks…
The Digest of upcoming webinars has been updated as of July 8.
Notable additions include:
BioPharma (2)
Pharma (1)
Check Out:
Elemental Analysis in Yeast Cells and Microplastics by ICP-MS with Automated Micro-Flow Sample Introduction on…
This Information Applies To: Agilent MassHunter 11 and later
Issue
Generating Acquisition Desktop and Quantitative Analysis shortcuts.
Steps to Follow
Double-click the Control Panel icon on the desktop or select Windows Start menu > Agilent...
This Information Applies To: Agilent MassHunter Workstation for LC/TQ and MassHunter Workstation for LC/TOF and LC/Q-TOF
Issue
How to view the MassHunter Data Acquisition Software Logs entries, change settings, and export the Logbook for archiving...
This Information Applies To: ICP-MS MassHunter with User Access Control (UAC)
Issue
It is necessary to update the database folder path in Change User Access Control:
After creating a new database in SDA with ICP-MS MassHunter.
To view a batch...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Over time, the electrodes may become pitted or eroded and users may see a decrease in precision or begin to experience the "Tube fault" error when new tubes are installed. If...
This Information Applies To: Agilent GTA Furnace and Flame Instruments, Agilent 240FS/240GFAA/GTA120/PSD120
Issue
There may be occasions when users need to remove GTA furnace center block workhead (instruments with both Flame and Furnace capabilities...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
The shroud should be replaced annually, or when there is evidence of damage caused by mechanical shock or contamination from liquid spillage.
Items Required
Shroud Removal...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Before replacing the electrodes and/or shroud, the GTA Furnace workhead will need to be disassembled. After replacing the electrodes and shroud, the GTA Furnace workhead will...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer
Issue
After starting a run, the run is aborted with the following error: Current = 0.0uA, Expected range: 5 - 3000.
Steps to Follow
Check...
This Information Applies To: Agilent OpenLab CDS 2.x in file system configuration
Issue
Sometimes, you will need to change the Projects Root Path / Project Storage Path . This article outlines the procedure on how to change it.
Background
...
This Information Applies To: 5000 series ICP-OES (5100,5110,5800,5900), AVS 4/6/7
Issue
Steps to bypass the AVS to troubleshoot poor performance on the ICP-OES
Tip : These steps should be completed after the Subsystem Communication...