One of the most challenging tasks for vacuum system designers is to create ultra-high and extreme-high vacuum pressures. Pumps capable of generating UHV and XHV pressure include Sputter Ion Pumps, Titanium Sublimation Pumps and Non-Evaporative Getters…
A system with poorly designed conductance can have drastic consequences on the effective pumping speed: the cornerstone of this tutorial is to emphasize the need to design a system that does not have negative effects on the performance of a high or ultrahigh…
Thermal gauges, out of all the available gauge technologies, offer excellent value for measuring rough vacuum pressure, but even UHV and XHV systems can benefit from them. All thermal gauges operate by heating a filament and exposing it to the vacuum…
When detecting leaks, it is important to distinguish between virtual and real ones. Examples of virtual leaks can be: gas desorption, diffusion, trapped volume, and back streaming. Leak-up or rate-of-rise tests can indicate whether a vacuum system's base…
Ionization gauges convert residual molecules to positively charged ions, and then attract them to a negatively charged collector where they create a measurable current. Modifications to high vacuum ionization gauges can optimize their performance at a…
No one gauge technology will provide pressure measurement throughout the range of vacuum. Combining vacuum sensors can produce a gauge capable of measuring pressure better than with any single technology. After having highlighted the properties of individual…
When choosing a vacuum gauge, it is possible to adopt high vacuum ionization gauges or sputter ion current. After describing the basic operating principle of the Sputter ion pump, this video shows how to measure UHV pressure with Agilent SIPs.
Material preparation and cleaning in ion pump manufacturing is critical to achieving ultrahigh vacuum pressures. One cleaning process to which the pump components are subjected is vacuum firing, through which the outgassing rate of the pump is reduced…
Join an upcoming webinar on Wednesday, May 8 at 11 a.m. PDT.
Customer feedback on turbo pumps often highlights concerns regarding the durability of these high-speed vacuum devices. However, users can take concrete steps to significantly enhance uptime…
This Information Applies To: 4150 TapeStation, 4200 TapeStation
Issue
How to deal with a TapeStation Electrode Cartridge change is due warning message.
Background
The Agilent TapeStation controller software will notify users to replace the...
This Information Applies To: Agilent OpenLab CDS
Issue
Sometimes the integration result is not ideal for all injections. This article outlines the step-by-step instruction to manually integrate peaks.
Background
There are 2 ways to integrate...
This Information Applies To: Agilent OpenLab CDS , Agilent OpenLab ChemStation
Issue
Calculation of Area percent or Height percent for uncalibrated compounds in OpenLab software. If all components respond equally in the detector, then Area% and...
This Information Applies To: Agilent ICP-MS (7700/7800/7850/7900/8800/8900)
Issue
How to power off the Agilent ICP-MS Foreline Pump to perform maintenance, or when fully powering off the Agilent ICP-MS System.
Background
The ICP-MS MassHunter...
This Information Applies To: Agilent ICP-MS (7500,7700,8800)
Issue
How to check the E2M18 or E2M18F foreline pump to determine if the pump needs maintenance?
Background
The oil cleanliness and oil level in the E2M18 or E2M18F foreline pump...
This Information Applies To: Agilent ICP-MS (7700/7800/8800)
Issue
How to replace the foreline pump oil in the DS 402.
Background
The DS 402 oil should be replaced at least every 3 months or when the oil color indicates it needs to be changed...
This Information Applies To: Agilent 8890/8860 GC Systems
Issue
How to delete data that is stored on the GC instrument.
Steps to follow
Caution : Before deleting data from your GC, Agilent recommends extraction of data as a backup...
This Information Applies To: 5200, 5300 and 5400 Fragment Analyzer, Femto Pulse and ZAG DNA analyzer
Issue
When no data is available in the Agilent ProSize data analysis software for one or more capillaries, the capillary(ies) could be misaligned...
This Information Applies To: Agilent ICP-MS (7800/7850/7900/8900)
Issue
How to check the MS40+ or MS40-S foreline pump to determine if the pump needs maintenance?
Background
The oil's cleanliness and level, in the MS40+ or MS40-S foreline...
This Information Applies To: Agilent ICP-MS systems (7700/7800/7850/7900/8800/8900)
Issue
Powering on Agilent ICP-MS Systems after maintenance, long-term shutdown, or for power cycling.
Steps to Follow
Confirm that the ICP-MS power plug...