Hello, Does this 6890N have a MSD connected to it, or are you just using 2D detectors on the GC? If you do not have a MSD then the GC/MS drivers should not be causing any issues. Looking over the SV reports you attached, the OpenLab CDS application appears…
Hello CMZainea
unfortunate this problem still hawe
With the help of the user's manual, we already finded several reasons and troubleshoot the error.
They are:
"Check the FID jet for clogs or damage. If the jet is clogged, you can try cleaning…
Hi, I have a GC 6890N with 5973N Mass selective detection, last week the computer failed and I had to change for another computer, on this computer windows XP, I installed the MSD ChemStation G1701EA E.02.00.493 software, on the Agilent MSD configuration…
Methods and Application Resources
Agilent YouTube
Recorded Webinars
Customer Education
CrossLab Method Services
Partner with Agilent CrossLab to accelerate productivity, and design the outcome you want to achieve. Our global team of…
Even experienced analysts can fail to recognize problems that hamper productivity in the ICP-MS workflow. So we’ve put together tips to help you recognize – and solve – problems in four key areas: sensitivity, accuracy, precision, and background. Replace…
Hi all,
I have taked the FID from a HP 6890 plus and put it on a Agilent 6890N that had two inlets and two ECD detectors. I only use the front inlet and installed the FID on the front detector, and removed the electronics for the second inlet and…
Hello all, I wish if I can find someone help me in this problem in ICP OES 5100 When I have been trying to ignite plasma It's happening one from two actions
1 - Plasma it ignite some moments and after that it turn off and software gives this message…
Hello !
The laboratory has a 7890 chromatograph with one evaporator and one FID detector. I want to upgrade it and add a second channel, the same, but for other tasks. I found catalog numbers on the Agilent website, but they are for the 7820 chromatograph…
Hi.
I have GC 8890 with FID detector.
When I turn on the GC, I get this error. I changed the igniter and the cable that is connected from the igniter to the board.
How can I check what is causing this error and how to fix it? There is a suspicion…
Previously there were different length jets depending on whether or not your GC had the adaptable or capillary-only base. (Capillary-only jets are shorter.) These have been replaced with universal FID jets, which will work on both base types going back…
This Information Applies To: Agilent 6000 Series LC/MS systems.
Issue
Checking and adjusting the nebulizer needle is part of regular maintenance or troubleshooting tasks. It is suggested when there is an issue with nebulizer spray shape or spray...
This Information Applies To: Agilent Single Quadrupole LC/MS systems controlled by OpenLab CDS software
Issue
How to check and recognize the current Instrument Status of your 6100 Series and InfinityLab LC/MS systems using OpenLab CDS software....
This Information Applies To: Agilent LC/MS Systems
Issue
Contamination of the tune mix or the Calibrant Delivery System (CDS) of your LC/MS system can cause Autotune failures and drops in sensitivity due to ion suppression.
Items Required...
This Information Applies To: Agilent LC/MS Systems
Issue
When there is suspected contamination of the CDS, low tune response, or possible blockage in the CDS, flushing the Calibrant system may be required.
Warning : This procedure risks...
This Information Applies To: Agilent LC/MS System
Issue
Instructions on how to check the level of calibrant in your LC/MS system, and refill the calibrant bottle if necessary.
Requirements
Checking the level of calibrant should be performed...
This Information Applies To: Agilent 6100 Series LC/MS Instruments
Issue
Instructions on how to fill the calibrant bottle in Agilent 6100 Series LC/MS Instruments when calibrant levels are running low.
Background
The ability to autotune your...
This Information Applies To: Agilent 6000 Series LC/MS systems
Issue
The article details the correct tuning mix to use according to your LC/MS system and the source type installed on your system. In cases where Agilent tuning mixes need to be diluted...
This Information Applies To: Agilent 7693A, 7650A, and 7683 Series automated liquid samplers
Issue
GC software or GC LED display shows ALS Failure code 245: Autosampler front tower plunger error or ALS Failure Code 945: Auto injector back tower...
This Information Applies To: TapeStation ScreenTapes and reagents
Issue
Using the search tool on Agilent.com to locate the declarations of conformity (DOC) for Agilent ScreenTapes and Test-Tapes, certificates of conformity (COC) for TapeStation...
This Information Applies To: Agilent 7693A Automatic Liquid Sampler
Issue:
The Automatic Liquid Sampler (ALS) system calibration process aligns the sample tray with the injector turret position to enable vial transfers without incident.
Calibration...