Hello, Does this 6890N have a MSD connected to it, or are you just using 2D detectors on the GC? If you do not have a MSD then the GC/MS drivers should not be causing any issues. Looking over the SV reports you attached, the OpenLab CDS application appears…
Hello CMZainea
unfortunate this problem still hawe
With the help of the user's manual, we already finded several reasons and troubleshoot the error.
They are:
"Check the FID jet for clogs or damage. If the jet is clogged, you can try cleaning…
Hi, I have a GC 6890N with 5973N Mass selective detection, last week the computer failed and I had to change for another computer, on this computer windows XP, I installed the MSD ChemStation G1701EA E.02.00.493 software, on the Agilent MSD configuration…
Methods and Application Resources
Agilent YouTube
Recorded Webinars
Customer Education
CrossLab Method Services
Partner with Agilent CrossLab to accelerate productivity, and design the outcome you want to achieve. Our global team of…
Even experienced analysts can fail to recognize problems that hamper productivity in the ICP-MS workflow. So we’ve put together tips to help you recognize – and solve – problems in four key areas: sensitivity, accuracy, precision, and background. Replace…
Hi all,
I have taked the FID from a HP 6890 plus and put it on a Agilent 6890N that had two inlets and two ECD detectors. I only use the front inlet and installed the FID on the front detector, and removed the electronics for the second inlet and…
Hello all, I wish if I can find someone help me in this problem in ICP OES 5100 When I have been trying to ignite plasma It's happening one from two actions
1 - Plasma it ignite some moments and after that it turn off and software gives this message…
Hello !
The laboratory has a 7890 chromatograph with one evaporator and one FID detector. I want to upgrade it and add a second channel, the same, but for other tasks. I found catalog numbers on the Agilent website, but they are for the 7820 chromatograph…
Hi.
I have GC 8890 with FID detector.
When I turn on the GC, I get this error. I changed the igniter and the cable that is connected from the igniter to the board.
How can I check what is causing this error and how to fix it? There is a suspicion…
Previously there were different length jets depending on whether or not your GC had the adaptable or capillary-only base. (Capillary-only jets are shorter.) These have been replaced with universal FID jets, which will work on both base types going back…
This Information Applies To: Agilent OpenLab CDS
Issue
Identifying the baseline codes and baseline code descriptions for OpenLab CDS
Background
OpenLab CDS Data Analysis includes the same integration algorithms as available in both OpenLAB...
This Information Applies To: Agilent OpenLab CDS
Issue
This article provides step-by-step instructions to filter a signal in an Intelligent Report.
Requirements
To be able to carry out the procedure as described, the privilege of Data Processing...
This Information Applies To: Agilent OpenLab CDS
Issue
This article outlines different ways to quantify the amount of compound in an unknown sample.
Background
Quantitation uses peak area or height to determine the amount of a compound in...
This Information Applies To: Agilent G1329A/B and G1313A Standard Autosampler
Issue
Replacing the needle seat of the Agilent 1100/1200/1260 Standard Autosampler may be required during regular maintenance, replacing a bent needle, or flow path blockage...
This Information Applies To: Agilent G1329A/B and G1313A Standard Autosampler
Issue
Replacing the needle of the Agilent 1100/1200/1260 Standard Autosampler may be required during regular maintenance, replacing a bent needle, or flow path blockage...
This Information Applies To: Agilent 1290 Infinity (G4226A) and Agilent 1260 Infinity (G1367E) HiP Autosamplers
Issue
Replacing the Needle Assembly of the Autosampler is required when:
The needle is visibly damaged.
Leaks or blockages in the...
This Information Applies To: Agilent 6000 Series LC/MS Systems equipped with MS40+ rotary vane pumps
Issue
Replacing the MS-40+ (rough pump) fluid periodically is a key maintenance procedure to improve vacuum performance and minimize the possibilities...
This Information Applies To: All Agilent 6000 Series LC/MS Systems without a gate valve for ion capillary installation/removal. For instructions for removing an ion capillary on LC/MS instruments with a gate valve installed, please click here
Issue...
This Information Applies To: Agilent 6000 series LC/MS instruments
Issue:
Cleaning the ion transfer capillary as part of regular maintenance or as part of troubleshooting when a loss of sensitivity in the instrument occurs.
Steps to follow ...
This Information Applies To: Agilent 6000 Series LC/MS systems.
Issue
Efficient electrospray ionization (ESI) in your LC/MS ion source requires a properly adjusted nebulizer needle in good condition. The nebulizer needle is a consumable item in...