Hi Pillai,
Thank you for this information. I recommend trying a different cellular adhesive to see if this improves the detaching. Additionally, you may want to increase your seeding density as 10K/well was used in this paper (though these cells were…
Important Information to Set Up Agilent as a Vendor
The Agilent and eMSion teams are excited to announce that, as of 3 June 2024, orders for all products will be handled by Agilent. The currently available software and hardware have been added to Agilent…
Join Agilent Senior Application Engineer, John Screech, live as he explores the critical concepts of vacuum.
We’ll begin with Q = P x S, the formula that explains EVERYTHING about the relationship between gas load, pumping speed, and pressure. John…
This Webinar focuses on the challenges in progressing from High Vacuum (approx. 10^-8 Torr) to Ultra-High Vacuum (below 10^-9 Torr) Pressure. Ion Pumps and Cryo-Molecular pumps are discussed in detail, as are the modifications to High Vacuum Gauges that…
Paul thanks for your reply. I have looked for information about these traps because I have two RMSH-2 traps and I thought about using one for the carrier gas (He) and the other for the FID hydrogen. Anyway, I'm going to buy the hydrogen trap. Thanks …
Agilent GC Knowledge Portal
The Agilent GC Knowledge Portal provides you with easy access to current operation, maintenance, best practices and troubleshooting information. Articles on the portal are produced through collaboration with Agilent experts…
Agilent GC Columns and Supplies
Things to consider:
Did you purchase additional required install supplies from Agilent, or will you be providing your own?
Did you purchase sufficient supplies to begin normal operations of the instruments?
Did…
Methods and Application Resources
Agilent YouTube
Recorded Webinars
Customer Education
CrossLab Method Services
Partner with Agilent CrossLab to accelerate productivity, and design the outcome you want to achieve. Our global team of…
Agilent Intuvo 8850 Gas Chromatograph e-Introduction GC-xxxxx-xxxx (Available soon)
A free self-paced tutorial that introduces tasks required to operate the Agilent Intuvo 9000 GC. It is recommended that you complete this 1-hour training prior to the…
This Information Applies To: Agilent OpenLab CDS
Issue
Identifying the baseline codes and baseline code descriptions for OpenLab CDS
Background
OpenLab CDS Data Analysis includes the same integration algorithms as available in both OpenLAB...
This Information Applies To: Agilent OpenLab CDS
Issue
This article provides step-by-step instructions to filter a signal in an Intelligent Report.
Requirements
To be able to carry out the procedure as described, the privilege of Data Processing...
This Information Applies To: Agilent OpenLab CDS
Issue
This article outlines different ways to quantify the amount of compound in an unknown sample.
Background
Quantitation uses peak area or height to determine the amount of a compound in...
This Information Applies To: Agilent G1329A/B and G1313A Standard Autosampler
Issue
Replacing the needle seat of the Agilent 1100/1200/1260 Standard Autosampler may be required during regular maintenance, replacing a bent needle, or flow path blockage...
This Information Applies To: Agilent G1329A/B and G1313A Standard Autosampler
Issue
Replacing the needle of the Agilent 1100/1200/1260 Standard Autosampler may be required during regular maintenance, replacing a bent needle, or flow path blockage...
This Information Applies To: Agilent 1290 Infinity (G4226A) and Agilent 1260 Infinity (G1367E) HiP Autosamplers
Issue
Replacing the Needle Assembly of the Autosampler is required when:
The needle is visibly damaged.
Leaks or blockages in the...
This Information Applies To: Agilent 6000 Series LC/MS Systems equipped with MS40+ rotary vane pumps
Issue
Replacing the MS-40+ (rough pump) fluid periodically is a key maintenance procedure to improve vacuum performance and minimize the possibilities...
This Information Applies To: All Agilent 6000 Series LC/MS Systems without a gate valve for ion capillary installation/removal. For instructions for removing an ion capillary on LC/MS instruments with a gate valve installed, please click here
Issue...
This Information Applies To: Agilent 6000 series LC/MS instruments
Issue:
Cleaning the ion transfer capillary as part of regular maintenance or as part of troubleshooting when a loss of sensitivity in the instrument occurs.
Steps to follow ...
This Information Applies To: Agilent 6000 Series LC/MS systems.
Issue
Efficient electrospray ionization (ESI) in your LC/MS ion source requires a properly adjusted nebulizer needle in good condition. The nebulizer needle is a consumable item in...