Hello everyone, I would like you to help me with a genesys 30 spectrophotometer, I have a problem that says: * Zero-Order search failed
psdt: I have already changed the focus for a halogen one but it only reads from 500 nm but at 325nm it does not read…
Hi. I am having more issues with my ancient 1100 stack. I am getting an EMPV initialization failed error. As I have done some other research it says that the bar should be around 20 bar and then you can do x, y, and z to fix it. However my bar is less…
I'm trying to use the DA Reprocessor (B.08.00) to process TOF data as a batch on a Windows workstation. If there are too many features, the DA Reprocessor stops with the following error in the log: Failed to run worklist Qual: The Operation has time out…
Hi all,
New to the forum, and having a few issues with our analytical 1260 HPLC. Main problem currently is an intermittent error on the auto sampler when trying to inject samples, it doesn’t happen necessarily at the first injection in each sequence…
Which voltage test point? The sideboard is permanently damaged if the cables are connected to it while the power is on. Did that happen?
Notice in your picture above that the HED is set to On.
If the HED power supply is not functioning properly…
Agilent 1200 Series Analytical Fraction Collectors_ Continues to FAIL initialization, also error code 3833 and error message needle too long, too short or missing. please Advise
Have you checked that your stock standards are not contaminated and tried a second source of SIC. Do you run He in addition to nogas and does it only fail for nogas but pass in He?
I've also seen Sb stick around in the tubing, autosampler probe, and…
Hello, How often does your reference amount for the compounds change? If it never changes or changes on an infrequent basis I would suggest using a constants file in custom calculator. Also we have seen syntax issues with expressions in IR when using…
That's interesting. I wonder if there are any differences to be expected between a 6890N and a 7890 GC when using Chemstation on the 6890N and Openlab 2.3 on the 7890 with FID? Also, would there be any differences in the signal to noise and dynamic range…
Hello Mark, You need to configure user tune. Click on the Settings widget, then Options, Selected Options and check User tune. Close Settings. Go to the Plasma widget, click on the drop down arrow and select Configure Ignition Sequence .Select user tune…
This Information Applies To: Agilent Atomic Absorption Spectroscopy Systems (240/280 Series Flame AA and 240/280Z/Zeeman/GTA 120 Graphite Furnace)
Issue:
This article includes recommended maintenance procedures to be performed daily, weekly or annually...
This Information Applies To: Agilent SpectrAA Software, Agilent 240/280 Flame Atomic Absorption Systems, 240/280 Zeeman Graphite Furnace Systems
Issue:
How to Reset Lamp Usage Counters or Add a New Lamp in SpectrAA
Caution : All physical...
This Information Applies To: Agilent GTA 120, Agilent 240Z AA Spectrometer, Agilent 280Z AA Spectrometer, Agilent 240FS/GTA120/PSD120/UltrAA System
Issue:
It is important to align the sample probe of the Programmable Sampler Dispenser (PSD) 120...
This Information Applies To: Agilent Flame AA Systems: e.g., 55B, 240FS, 280FS
Issue:
The Flame AA burner and burner components require regular cleaning to maintain system performance. Components include the burner, nebulizer, and spray chamber...
This Information Applies To: Agilent Flame Atomic Absorption (AA) Spectrometers (50/55/240/280 AA)
Issue:
How to clean a blocked nebulizer of a Flame AA, which may be causing low sensitivity or a sample uptake rate below 5 ml/min.
Steps to follow...
This Information Applies To: Agilent Graphite Furnace Systems (PSD 120/GTA 120/240Z AA/280Z AA)
Issue
Maintenance procedure for replacing the syringe and plunger of the PSD 120 sample dispenser for the Agilent GTA and Zeeman Graphite Furnace Systems...
This Information Applies To: Agilent AA (AA240, AA280) with Graphite Furnace Accessory (GTA)
Issue:
The Programmable Sample Dispenser (PSD) requires the sampling probe to be accurately aligned before the PSD can be used.
The PSD enables the...
This Information Applies To: All Agilent AA systems: 55B, 240FS, 280FS, 240Z, 280Z
Issue:
Optimizing the position of the lamp maximizes amount of light from the lamp passing through the optics to the detector, improving the signal-to-noise and the...
This Information Applies To: Agilent VGA 77, AA, VGA 77P, ICP
Issue:
The Agilent Vapor Generation Accessories VGA 77 and VGA 77P use high concentrations acids. The system needs to be thoroughly cleaned after each use.
The Vapor Generation Accessory...
This Information Applies To: All Agilent Atomic Absorption Spectrometry Systems (AA50, AA55, AA240, AA280)
Issue: This article describes when and how to clean an AA burner.
Background
For optimum and safe performance, burners (see Figure 1 ...