EMPV initialization failure bar less than 20

Hi. I am having more issues with my ancient 1100 stack. I am getting an EMPV initialization failed error. As I have done some other research it says that the bar should be around 20 bar and then you can do x, y, and z to fix it. However my bar is less than 10. I also have the flow set to 0 and yet it is still saying the actual flow is 0.20-.50 uL. I am not sure why it still has flow coming or whats going on. I have tried to turn it off and back on again and at first it seems okay and then it has that fail.

Was this helpful?