Thank you for all your suggestions, this is what I have done so far, With computer disconnected from our Network (to eliminate firewall issues, as per recommended by or IS/IT department): Both instruments connected through hub - failed Only 6850 connected…
Hi, Thanks a lot for your great help. However, how to use "Import worklist" function to import entries into the user defined " Amt. and Tot. Amt. " column? Other info are import succesfully except the two ones. I tired " Amt.","Tot. Amt. " in the importing…
I am not able to connect to the instrument using Lab Advisor because the instrument is connected to OpenLab. We should be able to disconnect using "Close Connection" from the OpenLab Control Panel, but it gives the following error when I try:
Agilent…
When I want to save or export a worksheet, does the software give me the option where to save it? When you save a worksheet, it always saves to the database. It will appear on the home page within Mercury. When you “export” either the data as .csv (via…
Thank you for your help, Paul. I'm not sure what happened on October 27. Many people use this system.
This morning, the system passed the Tune Evaluation, but the HiVac is still off. I looked at the Manual Tune task box, but do not see where I have…
Hello, everyone! I see a similar thread with masshunter , but not chemstation. Do I need a macro to do the job with retention indices? Are such macros available for download? I'd like to identify some VOC by indices in an n-alkanes scale in a hardware…
We have three Sulfur SCDs, two of which have inordinately high signal outputs:
1) Agilent 355; Model #G6644A; SN #CN11411006; PMT #DC7303; with FID on HP 5890 Series B
2) Sievers 355; Model SCD355; SN #0500-918; PMT #WB5942; with FID on HP 5890 Series…
The 6850 & 6890 LAN adapters are very often configured to respond to a "BOOTP" server program running on the network they are wired to.
So upon powerdown the GC loses its previously assigned IP address, and later upon powerup the GC sends a request…
Dear Royboyle, Thank you for you email, i am still having issue with peak purity at 50% sensitivity the peak purity of standard is failing and when i change the sensitivity to 40% then it passes, i am bit confused now what is the standard guideline regarding…
Hi Using Openlab 2.4 with our 6890N GC. My question is how to be able to capture a Blank Run (no injection, only FIDsignal during oven ramping) ? In the training I understood that a "Double Blank" is what I needed. But when I make a sequence, with first…
This Information Applies To: Agilent 5000 Series ICP-OES Instruments
Issue
The spectrometer incorporates interlocks and covers that are used to monitor critical operations to ensure Operator and instrument protection. If the instrument is used in...
This Information Applies To: Agilent ICP-OES Systems (700 Series, 5000 series)
Issue
If any yellow or orange coloration on any part of the torch is observed (not due to the sample being presented or recently run) or if the torch appears to be visibly...
This Information Applies To: Agilent 700 Series ICP-OES Systems
Issue
The 700 Series ICP-OES requires regular maintenance, and routine maintenance tasks are able to be performed by the instrument operator.
Any maintenance procedures not...
This Information Applies To: Agilent 5000 Series ICP-OES (5100/5110/5800/5900)
Issue
Correct ventilation is required to ensure proper function of the ICP-OES.
Resolution
The ICP-OES must be located under a flue that is vented by an exhaust...
This Information Applies To: Agilent demountable torches
Issue
The Agilent 5000 series ICP-OES instruments can be fitted with a demountable, semi-demountable, or bonded torch. The demountable and semi-demountable torches can be disassembled for...
This Information Applies To: 5100, 5110, 5800, and 5900 ICP-OES instruments
Issue
The ICP-OES operator can identify the source of plasma ignition failure. The main cause is air entering the plasma.
Steps to follow
Excessive air entering...
This Information Applies To: Agilent ICP-OES 5000 Series (5100/5110/5800/5900)
Issue
How to run the ICP-OES Performance Test after installation, preventative maintenance, repairs, and when troubleshooting.
Steps to Follow
The ICP-OES Performance...
This Information Applies To: Agilent 5000 Series ICP-OES
Issue
Blocked nebulizers are the source of many instrument performance issues including loss of sensitivity and poor precision, especially when running organics, high solids, or high salt...
VGA Setup
Multiple Results
This Information Applies To: Agilent VGA 77 (Vapour Generation Accessory)
Issue: This article discusses the setup steps for the VGA 77.
VGA 77
Warning : Noxious Fumes and Corrosive Liquids. Vapor generation methods of analysis involve...
This Information Applies To: Agilent VGA 77 Accessory
Issue: The Agilent Vapor Generation Accessories use high concentrations of HCl and require thorough cleaning to maintain optimum working condition.
Warning : The Vapor Generation...