Hello All, Not certain if this is the proper location for such a question, so please feel free to indicate the correct location if I am in error. Issue: Difficulty with GC Chromatography and irreproducible injections - Specifically, the chromatography…
Hello, I apologize for the delay. A lot of times, autostart macro failed errors are caused by corrupt instrument config files. Try resetting the instrument configuration files in the instrument folder (\Chem32\x\, where x is the number of the instrument…
Hello, Since each compound in your processing method would require a different resolution pass/fail threshold, I do not believe you would be able to set this up solely from the column properties on your intelligent report. I approached this by storing…
The degasser in our G7112B failed (diaphragm in the vacuum pump tore) and I swapped it out with a spare G1311A/G1379 combo while we wait for parts/repair.
Everything is connected and configured properly, the instrument config in OpenLab CDS 2.3 has…
Rapid through-barrier raw material identification
Point. Click. Get a pass or fail result.
It almost seems like magic at first, a workflow so simple it begs the question, why do it any other way? Through-barrier raw material identification is an absolute…
Hello, Is there an update available for the Chemspider library editor script? The script is named DownloadMolfilesFromChemspider.libedit and as the name suggests, downloads the mol files for each library entry from chemspider. The chemspider API appears…
So just to let everyone know, the SSD on this computer has now already failed. Seems like there was something wrong with the hardware to start with !. Let's hope a new SSD will fix this issue. -Francois
How long is your "electricity problem" ? And what is it? A switchover or a full-on power fail or?
Agilent does not support GC or GCMS on a UPS as too many UPS cannot handle the high amperage load. See: (+) Use of a UPS to Supply Power to an Agilent…
Hello, The tune evaluation on the 5977B GC-MS is failing. The reason is 502/69 mass ratio is smaller than 2.4 (reading = 1.5-2.0), more specifically the 502 m/z count is around 7000-9000, instead of 20000 which is seen in previous autotunes. I cleaned…
This can happen when one of the motors on the arm of a vial sampler (G1313, G1329, or G7129) is failing. It will be fine for a number of injections, then one of the motors gets too hot from all the movement and will cause the sampler to error. When you…
This Information Applies To: 4200, 4150 and 2200 TapeStation, TapeStation analysis software A02.02 or higher.
Issue:
When using the Agilent 4200, 4150 and 2200 TapeStation systems, the DV 200 of FFPE RNA samples can be calculated within the TapeStation...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, ProSize Data Analysis Software
Issue
How to export a ladder as a size calibration file and import it into a different run in ProSize.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
It is possible to set up the 2100 Expert software so that the files are automatically exported each time a chip run is complete.
Steps to Follow
To turn...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue:
How to identify and troubleshoot late migration of the ladder, marker, and sample peaks in data generated on the Agilent 2100 Bioanalyzer system.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
If communication between the 2100 Bioanalyzer and the PC cannot be established, or if an intermittent communication loss occurs, follow the instructions in...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
Instructions on how to import from or export data into LIMS software.
Steps to Follow
Data import
When importing sample names and sample comments from...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software version B.02.08 or later
Issue
When printing a report to PDF or HTML with the 2100 Expert software, the error "Failed to Generate Report" appears.
Background
This error...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue
Resetting upper or lower markers from their automatically assigned settings in the Agilent 2100 Expert software.
Background
The Agilent 2100 Expert software...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert Software
Issue
Samples with a broad signal such as NGS smears should be analyzed by setting up a region. Analyzing a region is also termed smear analysis.
Steps to Follow...