Than you should probably stop advertise it as a sulfur-specific filter on specs table (add "and hydrocarbons" words) https://www.agilent.com/en/products/lab-supplies/chromatography-spectroscopy/gas-management/gas-clean-purification-syste… . Otherwise…
Error : Data Subscriptions Failed. Are inbound Ports Blocked? Is there Right Type of GC at IP Address? GC does seem to be connected but not the MS. Does anyone have suggestions on what the problem might be?
Try to reinstall using the ChemStationSystem account. If that fails, try the following before installing. 1. Delete the ChemStationSystem account. 2. Delete the chemstaion.ini file located in the Windows directory. 3. Log in as the Administrator and install…
I see the green lignt ON on the logic board. I never see it is blinking though. Thank you for sending the document. Once I tried ping from another PC with firewall off, but ping got failed. I will try ping from that PC after reading the document.
The…
Autostart Macro failed, error# 999 occurred (OpenLAB CDS Chemstation Rev. C.0x.0x) This is usually resolved by resetting the instrument configuration files in the instrument folder (\Chem32\x\, where x is the number of the instrument in question). Append…
Hi All, We are experiencing a very strange issue (very broad peak) with Dimethyl Formamide Solvent when run with one particular residual solvent method utilizing Dimethyl Formamide as Diluent. Method has been run for the past 4/5 years without any issues…
We recently purchased a GS Oxyplot column based on its reported excellence for separating oxygenated compounds in hydrocarbons streams such as Ethylene, which is required to be of ultra high purity for polymerization catalysts. Unfortunately we see a…
Hi everyone, A few weeks ago in our lab we installed a new inlet/column/detector set-up on an existing 7890B GC in our lab. This GC already had a front inlet/detector installed and there was never anything installed on the back components. Therefore we…
Hi evryone
Please help: i just get these 2 messages which make me i can not inject from my 7890A and 5973C MSD " tune action stopped: cannot achieve constant peaks widths " also "limits fail: pump oils (days), tune time (hours) at the same moment the…
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
It is possible to set up the 2100 Expert software so that the files are automatically exported each time a chip run is complete.
Steps to Follow
To turn...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue:
How to identify and troubleshoot late migration of the ladder, marker, and sample peaks in data generated on the Agilent 2100 Bioanalyzer system.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
If communication between the 2100 Bioanalyzer and the PC cannot be established, or if an intermittent communication loss occurs, follow the instructions in...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
Instructions on how to import from or export data into LIMS software.
Steps to Follow
Data import
When importing sample names and sample comments from...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software version B.02.08 or later
Issue
When printing a report to PDF or HTML with the 2100 Expert software, the error "Failed to Generate Report" appears.
Background
This error...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue
Resetting upper or lower markers from their automatically assigned settings in the Agilent 2100 Expert software.
Background
The Agilent 2100 Expert software...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert Software
Issue
Samples with a broad signal such as NGS smears should be analyzed by setting up a region. Analyzing a region is also termed smear analysis.
Steps to Follow...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software, RIN NA, Error 4501, RNA 6000 Nano kit (p/n 5067–1511 ), RNA 6000 Pico kit (p/n 5067–1513 )
Issue:
The RIN is not displayed in the software or shows as NA. If the RIN is NA, the...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software, RNA 6000 Nano kit (p/n 5067-1511), RNA 6000 Pico kit (p/n 5067-1513)
Issue:
Which assay should be selected in the Agilent 2100 Expert software when running yeast total RNA samples...