Thanks for this.
To make sure I'm understanding this correctly does this mean that the instant pilot is acting as the terminating end of the bus and that the socket that the instant pilot is connected to is the one that is failing when no instant pilot…
I have observed that when a method is transferred to a new system, you need to save it in the new system before using it. If you just copy the method and use it, sometimes it fails. Just by saving it, it makes it work. I guess it saves some defaults from…
The Agilent LabAdvisor software shows the Xe lamp life time, but in percent, not in hours. This is because of a fairly complex calculation, taking the amount of high or low power flashes into consideration. The higher the number, the more worn the lamp…
We have an LC-MS with an Agilent 1260 Infinity HPLC stack, with a G7167A multisampler. The multisampler has one drawer installed with 2x 54-vial plates. We have had some communication issues recently where the transport initialistation kept failing after…
it does not work,
I tried to install openlab v2.4 manually, the installation failed at the agilent platform in the install or upgrade content management part,
Hello, To cut to the chase: No, peak areas calculated in MassHunter will not be equal to the peak areas calculated in GC/OpenLAB ChemStation software. GC ChemStation and OpenLAB ChemStation use response units of pA for FID data whereas the response axis…
Hi, My method for 6890 GC/FID has a warning message that there are overlapping integrations for some of the compounds, I would like to correct this but unsure how, I know the answer lies in the integration events table. Any help is appreciated!
Hi Lycrecia,
We checked the volume calibration section and we did the full range volume dispense, as described in the manual. However, we are not sure which value we should add to the actual volume in the volume calibration screen. Do we need to do…
What are the detector voltages? Select the Hardware button, or Hardware/Dashboard from Task manager, and click the Detector image. Select EM setting. What are the voltages for Discriminator, Analog HV, and Pulse HV?
Was the instrument off, for an extended…
Hello, Your question brings some additional questions for me. You mentioned that your rescans are failing eventhough the product is correct. Is your method robust enough. You should not see many fails in a batch if the instrument is properly operated…
This Information Applies To: Agilent 4200 TapeStation 4150 TapeStation, TapeStation controller software
Issue
The system verification can be run to check the TapeStation performance, for example, when you suspect an instrument hardware fault.
...
This Information Applies To: Agilent 4200 and 4150 TapeStation software.
Issue
How to uninstall and reinstall the 4200 and 4150 TapeStation software.
Background
An uninstallation and reinstallation of the TapeStation software should be performed...
This Information Applies To: 2200 TapeStation instruments, 2200 TapeStation controller software
Issue:
The Agilent 2200 TapeStation controller software won't launch but displays the correct serial number in the top-right corner of the loading screen...
This Information Applies To: 4200, 4150 and 2200 TapeStation, TapeStation analysis software A02.02 or higher.
Issue:
When using the Agilent 4200, 4150 and 2200 TapeStation systems, the DV 200 of FFPE RNA samples can be calculated within the TapeStation...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, ProSize Data Analysis Software
Issue
How to export a ladder as a size calibration file and import it into a different run in ProSize.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
It is possible to set up the 2100 Expert software so that the files are automatically exported each time a chip run is complete.
Steps to Follow
To turn...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue:
How to identify and troubleshoot late migration of the ladder, marker, and sample peaks in data generated on the Agilent 2100 Bioanalyzer system.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
If communication between the 2100 Bioanalyzer and the PC cannot be established, or if an intermittent communication loss occurs, follow the instructions in...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
Instructions on how to import from or export data into LIMS software.
Steps to Follow
Data import
When importing sample names and sample comments from...