The probability of water precipitation is very low if the FID temperatures are high enough, but in times of 5890 the FID could not ignite well when water was present. In principle a FID can be operated without makeup gas, which manufacturers officially…
Hi Marty,
We have a FID and an MS connected to the same system. We only want to acquire the signal of FID, but if we want to report the method parameters we are “forced” to acquire both (we do not really know why and we have already ask the question…
I have a problem with my FID on a HP-4890d Gas Cromatograph.
The FID was working as normal, then the FID didn't start, so I checked the gas flows, and the H2 didn't come out from FID.
I suspect maybe the Hydrogen pipe line is clogged or the on/off…
Part Number
Description
Link to Ordering (includes photo)
126 1012
J&W DB-1 GC Column, 10 m, 0.05 mm, 0.05 µm, 7 inch cag
126-1012 | Agilent
5182 0717
Cap, screw, blue, PTFE/red silicone septa, 100/pk. Cap size: 12 mm
5182-0717…
Hi all,
We have a 5975 MSD that is failing to pump down. The turbo pump (Pfeiffer HiPace 300) does not appear to be spinning up, though the turbo pump electronic drive unit has power and is displaying LED light activity. The rough pump has been serviced…
Hi, thank you for your reply.
I am trying to process metabolomic sample .d files generated from an LCMS-QTOF. I did not get this problem a month ago, however, to solve other problems with permissions I had to uninstall and reinstall profinder.
I have…
Learn about how to inspect the torch, bonnet, shield plate, and RF Coil, as well as torch cleaning and handling recommendations for Agilent ICP-MS systems.
Preventative and regular maintenance are crucial in avoiding ignition issues and plasma instability…
Why noise? I don't see a problem with noise.
With regards to the failed drift results, officially the test is to be run with a flow rate of 0.5 ml/min.
BioConfirm was not designed as a proteome search engine. Searching for proteins using intact mass may not work since the proteome databases are based on DNA reads and include signal proteins/peptides removed from the expressed protein and the fasta file…
A customer has the MP-AES 4200 for soil analysis but recently started to have a problem with the ignition of the plasma or keeping the plasma on. The customer reported that was a problem with the exhaust system or the inlet fan (cooling system). I checked…
This Information Applies To: Agilent 4200 TapeStation 4150 TapeStation, TapeStation controller software
Issue
The system verification can be run to check the TapeStation performance, for example, when you suspect an instrument hardware fault.
...
This Information Applies To: Agilent 4200 and 4150 TapeStation software.
Issue
How to uninstall and reinstall the 4200 and 4150 TapeStation software.
Background
An uninstallation and reinstallation of the TapeStation software should be performed...
This Information Applies To: 2200 TapeStation instruments, 2200 TapeStation controller software
Issue:
The Agilent 2200 TapeStation controller software won't launch but displays the correct serial number in the top-right corner of the loading screen...
This Information Applies To: 4200, 4150 and 2200 TapeStation, TapeStation analysis software A02.02 or higher.
Issue:
When using the Agilent 4200, 4150 and 2200 TapeStation systems, the DV 200 of FFPE RNA samples can be calculated within the TapeStation...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, ProSize Data Analysis Software
Issue
How to export a ladder as a size calibration file and import it into a different run in ProSize.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
It is possible to set up the 2100 Expert software so that the files are automatically exported each time a chip run is complete.
Steps to Follow
To turn...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue:
How to identify and troubleshoot late migration of the ladder, marker, and sample peaks in data generated on the Agilent 2100 Bioanalyzer system.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
If communication between the 2100 Bioanalyzer and the PC cannot be established, or if an intermittent communication loss occurs, follow the instructions in...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
Instructions on how to import from or export data into LIMS software.
Steps to Follow
Data import
When importing sample names and sample comments from...