kristen.sensabaugh| Part Number | Description | Link to Ordering (includes photo) |
| 126 1012 | J&W DB-1 GC Column, 10 m, 0.05 mm, 0.05 µm, 7 inch cag | 126-1012 | Agilent |
| 5182 0717 | Cap, screw, blue, PTFE/red silicone septa, 100/pk. Cap size: 12 mm | 5182-0717 | Agilent |
| 5182 0716 | Vial, screw top, amber, write-on spot, certified, 2 mL, 100/pk. Vial size: 12 x 32 mm (12 mm cap) | 5182-0716 | Agilent |
| G1969 85000 | LC/MS Calibration standard, for ESI-TOF, 100 mL | G1969-85000 | Agilent |
| 5182 0714 | Vial, screw top, clear, certified, 2 mL, 100/pk. Vial size: 12 x 32 mm (12 mm cap) | 5182-0714 | Agilent |
| G1329 87017 | Needle seat, PEEK, 0.17 mm ID capillary. Compatible with needle assembly G1313-87201 | G1329-87017 | Agilent |
| 5182 0715 | Vial, screw top, clear, write-on spot, certified, 2 mL, 100/pk. Vial size: 12 x 32 mm (12 mm cap) | 5182-0715 | Agilent |
| 5062 8562 | Cartridge for active inlet valve G1312-60025, 400 bar. For 1100, 1200, 1200 RRLC, 1260 Infinity LC pumps | 5062-8562 | Agilent |
| 01078 87302 | Sample loop, stainless steel, 100 µL. for G1313A, G1329A/B Autosampler and 1120/1220 System with Autosampler | 01078-87302 | Agilent |
| 6040 0834 | Replaced by 5191-5851. AVF 45 platinum, 1 qt | 5191-5851 | Agilent |
| 5181 1270 | Vial insert, 250 µL, glass with polymer feet, 100/pk Insert size: 5.6 x 30 mm | 5181-1270 | Agilent |
| G1833 65569 | Peristaltic pump tubing, Easy-Fit, standard for sample uptake, recommended for aqueous, acid or alkaline matrix, 1 pack of 12 pcs. Clear PVC, 2-stop, white/white tabs, 1.02 mm id. Standard for sample uptake on Agilent 7500, 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS. Replacement for G1833-65569. | 5005-0020 | Agilent |
| 0100 1853 | Rotor seal, Vespel, 400 bar, 2 grooves | 0100-1853 | Agilent |
| 820999 901 | High performance ZORBAX guard fittings kit (ZGC); includes low-volume guard holder, inlet end fitting (2), outlet end fitting with integrated column connector, and PEEK fingertight fitting, seals (2/pk) | 820999-901 | Agilent |
| G1311 67701 | 1100 Gradient valve assembly | G1311-67701 | Agilent |
| 2140 0820 | InfinityLab long-life deuterium DAD/MWD lamp, with RFID tag. For Agilent diode array detectors with standard flow cell (G1315C/D, DAD of 1220 LC, G7115A) and multiple wavelength detectors (G1365C/D, G7165A) | 2140-0820 | Agilent |
| 5188 5365 | Inlet liner O-ring, non-stick fluorocarbon, 10/pk | 5188-5365 | Agilent |
| X3760 64004 | AVF Platinum | X3760-64004 | Agilent |
| 5185 5820 | Cap, screw, blue, PTFE/red silicone septa, 500/pk. Cap size: 9 mm | 5185-5820 | Agilent |
| G1313 87201 | Needle assembly, for G1313A, G1329A/B autosampler. Compatible with needle seat G1329-87017 and G1329-87012 | G1313-87201 | Agilent |
| 5080 8853 | Ferrule, graphite, short, 0.5 mm id, for 0.1 to 0.32 mm columns, 10/pk | 5080-8853 | Agilent |
| 401425 | Optical tube strip caps (8x Strip). For use with the Agilent TapeStation systems, 1 box of 120. | 401425 | Agilent |
| 5185 5959 | Tuning Solution for ICP-MS, contains 1 µg/L each of Li, Mg, Y, Ce, Tl and Co in a matrix of 2% HNO3; 2 x 500 mL bottles | 5185-5959 | Agilent |
| 5063 6591 | Fingertight fitting, PEEK, 10/pk, for 1/16 inch (1.6 mm) OD capillary | 5063-6591 | Agilent |
| G1099 20133 | Repeller insulator, for Agilent 5975 and 5973 MSD | G1099-20133 | Agilent |
| 5067 4728 | Seal cap. For all manual purge valves. | 5067-4728 | Agilent |
| 19244 80560 | FID jet, universal fit, 0.011 inch id. Replaced by 5200-0176. | 5200-0176 | Agilent |
| G1531 80560 | FID jet, universal fit, 0.011 inch id. Replaced by 5200-0176. | 5200-0176 | Agilent |
| 5062 2418 | Swagelok fitting, stainless steel, 10/pk. with short screw, for 1.6mm OD tubing | 5062-2418 | Agilent |
| 5188 5367 | GC inlet seal, gold plated, with washer | 5188-5367 | Agilent |
| 5190 0917 | InfinityLab long-life deuterium lamp, 8 pin, with RFID tag. For diode array detectors with Max-Light cartridge cell (G4212A/B, G7117A/B/C) and G7100 CE | 5190-0917 | Agilent |
| 993967 902 | ZORBAX Eclipse XDB-C18, 80Å, 4.6 x 150 mm, 5 µm, 400 bar pressure limit | 993967-902 | Agilent |
| 5181 3354 | ALS Syringe, 10 µL, fixed needle, 23-26s/42/cone, PTFE-tip plunger | 5181-3354 | Agilent |
| 5182 0837 | Vial, headspace, certified, crimp, clear, flat bottom, 20 mL, 100/pk. Vial size: 22.75 x 75 mm (20 mm cap) | 5182-0837 | Agilent |
| 401428 | Optical tube strips (8x Strip). For use with the Agilent TapeStation systems, 1 box of 120. | 401428 | Agilent |
| 18710 60170 | GC flame ionization detector standard, C14, C15, and C16 normal hydrocarbons, 0.033% w/w in hexane, 3 x 0.5 mL. | 18710-60170 | Agilent |
| G1833 65570 | Peristaltic pump tubing, Easy-Fit, long-life, standard for spray chamber drain, 1 pack of 12 pcs. Beige thermoplastic elastomer, 3-stop, yellow/blue tabs, 1.52 mm id. Standard for pumping spray chamber drain to waste on Agilent 7500, 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS. Replacement for G1833-65570. | 5005-0022 | Agilent |
| 5023 0271 | Frit for 1290 Inline filter, 0.3 µm, 5/pk | 5023-0271 | Agilent |
| 5067 5599 | Loading Tips, 10 Pk. For use with Agilent 4150 and 4200 TapeStation systems. 1 package contains 112 tips. | 5067-5599 | Agilent |
| 0101 1416 | Rotor seal, 2-position, 6-port injection valve, PEEK, 600 bar max | 0101-1416 | Agilent |
Unsure of what part to order? Refer to our selector tools to help you choose the right product for your application.
- Sample Preparation Selector Tools, to help you choose the right Captiva Syringe Filters or QuEChERS product Sample Preparation Selector | Agilent
- Autosampler Vial Selector Tool Vial Selector | Agilent
- Syringe Selector Tool: Syringe Selector | Agilent
- GC Column Selector Tool: GC Column Selector | Agilent
- GC Ferrule Selector Tool: GC Ferrule Selector | Agilent
- LC Column Selector Tool: LC Column Selector | Agilent
- Biopharma LC Column Selector Tool: Biopharma Selector | Agilent
- Microplate Selection Tool Microplate Selection Tool | Agilent