Hello bofzgi84 ,
As an update to this, a colleague of mine has pointed out that for LC data the Compound ion count threshold settings are not present. I took the above screenshot with no data file loaded, so all possible options were enabled. I can…
Was the air/water check before you changed the septum and liner acceptable? 60% Oxygen...what is the Nitrogen percentage? 60% Oxygen would either be a gigantic leak and the Nitrogen percentage will be off the charts, or there is oxygen in the carrier…
Hi ,
I have try the method (Isocratic) on the different lines (A,B,C,D) and compare the results . It appear that there was a difference (shift in retention time about 2 mins) in the result were line (A) is used in the method . Thus the problem might…
Dissolution testing is labor intensive as well as a technique and time dependent analytical procedure. A typical dissolution workflow consists of several steps including dissolution media preparation, media filling, introducing the dosage form into the…
Hello all, What is the difference between the IntelliQuant / no IntelliQuant mode in SemiQuant (QuickScan) ? When I activate this option, the LOQ are modified.
In IntelliQuant mode, the LOQ is calculated according to TDS in sample ? Thanks in advance…
CBM said: As you state, the MessageBox.Show() act as if modeless - but the MessageBox.Show() is not modeless, I don't know the correct term, but something with Threads and Async... And in Visual Studio you likely have a common parent, that makes it act…
Here is a "best of" collection of links to manuals and tools for ICP-MS on Agilent.com.
ICP-MS Hardware Troubleshooting & Maintenance Resources
Technical Overview
Agilent ICP-MS Resource Library
Troubleshooting Tool for ICP-MS Sensitivity…
This Information Applies To: Agilent 4200 TapeStation 4150 TapeStation, TapeStation controller software
Issue
The system verification can be run to check the TapeStation performance, for example, when you suspect an instrument hardware fault.
...
This Information Applies To: Agilent 4200 and 4150 TapeStation software.
Issue
How to uninstall and reinstall the 4200 and 4150 TapeStation software.
Background
An uninstallation and reinstallation of the TapeStation software should be performed...
This Information Applies To: 2200 TapeStation instruments, 2200 TapeStation controller software
Issue:
The Agilent 2200 TapeStation controller software won't launch but displays the correct serial number in the top-right corner of the loading screen...
This Information Applies To: 4200, 4150 and 2200 TapeStation, TapeStation analysis software A02.02 or higher.
Issue:
When using the Agilent 4200, 4150 and 2200 TapeStation systems, the DV 200 of FFPE RNA samples can be calculated within the TapeStation...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, ProSize Data Analysis Software
Issue
How to export a ladder as a size calibration file and import it into a different run in ProSize.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
It is possible to set up the 2100 Expert software so that the files are automatically exported each time a chip run is complete.
Steps to Follow
To turn...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue:
How to identify and troubleshoot late migration of the ladder, marker, and sample peaks in data generated on the Agilent 2100 Bioanalyzer system.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
If communication between the 2100 Bioanalyzer and the PC cannot be established, or if an intermittent communication loss occurs, follow the instructions in...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
Instructions on how to import from or export data into LIMS software.
Steps to Follow
Data import
When importing sample names and sample comments from...