Here is more information on Peak Evaluation!
https://www.youtube.com/watch?v=XL0SP-T0CtQ&pp=ygUXYWdpbGVudCBwZWFrIGV2YWx1YXRpb24%3D
https://www.youtube.com/watch?v=GOXghDxtVxI&pp=ygUXYWdpbGVudCBwZWFrIGV2YWx1YXRpb24%3D
If you want to learn more about…
Hello,
I would open a ticket with Agilent informatics support if your installation is client server based or your local Agilent support organization for workstation installation. They can typically help with issues like this where the data needs to…
Hello nikosmpik ,
You will need to go to your WIndows Services app and restart the service, make sure you set that to a Running status, and an Automatic startup type.
To get to the Services app you can do one of two things:
1. Press the Start…
Hello,
You need onsite visit. According to error 60304 and filament time this look like the power tube is too old and end of power life and need replacement.
Hi Metals.
I'm glad to see that you could solve the problem! And I'll take special note since our octopole has never been cleaned. We were told by Agilent that cleaning is meant to be done by Agilent's staff only. Thanks.
Yes, that solution of Ca…
Hi, the peak area has no influence on the calculation of Mw when measuring with concentration detectors only (RI, UV, ELSD e.g.). When performing Viscometry & Lightscattering measurements, the peak area is needed for the calculation. As an additional…
Occasionally the tune files get corrupted and you need to go back to an old one or start again from the default atune.u file. Glad the problem is resolved!
Part 1 included many questions and some answers about the maximum abundance that should be detected at the electron multiplier. Another important consideration is how much sample should go into the column.
See Which Electron Ionization Ion Source? Part…
Thank you for taking a moment to review the Community Guidelines. You agree to all of the guidelines posted and linked here when using the Agilent Community. These guidelines are here to help you be a valuable contributor to the community and make sure…
This Information Applies To: Agilent 4200 TapeStation 4150 TapeStation, TapeStation controller software
Issue
The system verification can be run to check the TapeStation performance, for example, when you suspect an instrument hardware fault.
...
This Information Applies To: Agilent 4200 and 4150 TapeStation software.
Issue
How to uninstall and reinstall the 4200 and 4150 TapeStation software.
Background
An uninstallation and reinstallation of the TapeStation software should be performed...
This Information Applies To: 2200 TapeStation instruments, 2200 TapeStation controller software
Issue:
The Agilent 2200 TapeStation controller software won't launch but displays the correct serial number in the top-right corner of the loading screen...
This Information Applies To: 4200, 4150 and 2200 TapeStation, TapeStation analysis software A02.02 or higher.
Issue:
When using the Agilent 4200, 4150 and 2200 TapeStation systems, the DV 200 of FFPE RNA samples can be calculated within the TapeStation...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, ProSize Data Analysis Software
Issue
How to export a ladder as a size calibration file and import it into a different run in ProSize.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
It is possible to set up the 2100 Expert software so that the files are automatically exported each time a chip run is complete.
Steps to Follow
To turn...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue:
How to identify and troubleshoot late migration of the ladder, marker, and sample peaks in data generated on the Agilent 2100 Bioanalyzer system.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
If communication between the 2100 Bioanalyzer and the PC cannot be established, or if an intermittent communication loss occurs, follow the instructions in...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
Instructions on how to import from or export data into LIMS software.
Steps to Follow
Data import
When importing sample names and sample comments from...