This video guides you through the process of removing or installing the nebulizer and applies to all LC/MS models.
This video is intended to support the written instructions found in the online help or in your instrument's user guide.
Parts required…
Hi Mau1909
We can perform this type of measurements with the Cary Eclipse. This is called EEM (Excitation-Emission-Matrix):
3D graph or contour plot are available. The 3D mode automatically collects a series of excitation, emission, or synchronous…
The universal VUV detector has sensitivity better than an FID and similar to an MSD while allowing data acquisition across 12 different wavelength bands to focus on selected compounds of interest. It can be mounted directly on top of an Agilent 7890 or…
Hi,
I have been getting a Hexapole 2 RF fault on a 6545 QTOF for the past few weeks. The logbook shows that it came on for short periods for a couple of days, then went away for a few days, then came on continuously since then.
I called it in, and…
Hello mohls ,
The default location for the log file should be within the D:\MassHunter folder. Since it appears to be trying to write the log to the C:\Program Files folder, which will never succeed, I suspect that something has occurred with the BioConfirm…
T his collection of “best of” resources includes manuals and site-preparation checklists , specifications, application and how -it-works information, videos and webinars , and eLearning courses for Agilent Automated Liquid Handling instrument and software…
Ok so I guess you have to manually move the arm out because the inside screw is covered by the turret. It seems hard to move though and I don't want to break it.
According to the user manual you are able to change the following things in a timetable on a G7121A:
I actually never used a timetable on a G7121A model. Like the G1321C, the G7121A just offers one pair of EX/EM, so signal A only. For enhanced signal…
This Information Applies To: Agilent 4200 TapeStation 4150 TapeStation, TapeStation controller software
Issue
The system verification can be run to check the TapeStation performance, for example, when you suspect an instrument hardware fault.
...
This Information Applies To: Agilent 4200 and 4150 TapeStation software.
Issue
How to uninstall and reinstall the 4200 and 4150 TapeStation software.
Background
An uninstallation and reinstallation of the TapeStation software should be performed...
This Information Applies To: 2200 TapeStation instruments, 2200 TapeStation controller software
Issue:
The Agilent 2200 TapeStation controller software won't launch but displays the correct serial number in the top-right corner of the loading screen...
This Information Applies To: 4200, 4150 and 2200 TapeStation, TapeStation analysis software A02.02 or higher.
Issue:
When using the Agilent 4200, 4150 and 2200 TapeStation systems, the DV 200 of FFPE RNA samples can be calculated within the TapeStation...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, ProSize Data Analysis Software
Issue
How to export a ladder as a size calibration file and import it into a different run in ProSize.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
It is possible to set up the 2100 Expert software so that the files are automatically exported each time a chip run is complete.
Steps to Follow
To turn...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue:
How to identify and troubleshoot late migration of the ladder, marker, and sample peaks in data generated on the Agilent 2100 Bioanalyzer system.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
If communication between the 2100 Bioanalyzer and the PC cannot be established, or if an intermittent communication loss occurs, follow the instructions in...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
Instructions on how to import from or export data into LIMS software.
Steps to Follow
Data import
When importing sample names and sample comments from...