Attend our second GC Live virtual event on Thursday, April 11 at 11:00 a.m. EST to learn about the extensive suite of troubleshooting and diagnostic tools that are built into Agilent intelligent GC systems. These can be accessed locally using the instrument…
Join our inaugural GC Live virtual event on Thursday, February 15 at 11:00 a.m. EST to learn how the intelligent features of Agilent 8890 and Intuvo 9000 GC systems can be used through their digital interfaces. An integrated touchscreen allows access…
The Digest of upcoming webinars has been updated as of February 6.
Notable additions include:
LC & LCMS (3)
OMICS (1)
Check Out:
Part 3: The Mining Lifecycle and Elemental Analysis Workshop Series on February 13
Acceptability and Antioxidant…
Hello,
You cannot store anything but numeric values in variables and aggregators for IR. You could create your own public array in custom code or a dll where you can store and recall the values as needed. A customer wanted to be able to display in…
Mike,
It is possible in later versions, but I think in 2.5 that may not be available. If you do not see it in the list, then it was not added to that version. You can use CC to back calculate the values from the compound amount, concentration, multiplier…
It was on the equipment, you can check to be sure by running a performance check on the chiller. Our chiller passed all points on the performance check but failed on the ICP system.
Hi Ajgor,
I am trying to something very similar to what you were doing with your 6890. I have been having some issues getting a response from the machine (using a HyperTerminal PuTTY) and was wondering if you had any tips for troubleshooting this. …
This Information Applies To: AriaMx real-time qPCR system
Issue
The instrument fails to reach the required temperature during a run.
Resolution
Check if the temperature of the environment around the instrument is too low resulting in the instrument...
This Information Applies To : Agilent ELSDs G4260A, G4260B, G4261A, G4621B, G7102A, G7102B
Content :
If the evaporator tube of ELSD becomes contaminated with nonvolatile material resulting in poor chromatography, please use the procedure in this...
This Information Applies To: Agilent ICP-MS (7800/7850/7900/8900)
Issue
The oil should be replaced at least once every six months, or when the oil color is indicates it needs to be changed . The foreline pump should be checked monthly. This article...
This Information Applies To: Agilent ICP-MS MassHunter versions 4.4 - 4.6 and 5.x.
Issue
After performing an autotune, the batch tune report will not generate or print.
Background
ICP-MS MassHunter uses an application called ICP-MS Data Analysis...
This Information Applies To: Agilent 6400 Series triple quadrupole LC/MS systems equipped with a gate valve
Issue
Installing the Ion Transfer Capillary after cleaning or replacement in Agilent LC/MS instruments with a gate valve.
Required Items...
This Information Applies To: Agilent OpenLab CDS 2.x
Issue
This article outlines the procedure on how to quantify uncalibrated compounds in OpenLab CDS 2.x. using reference compounds in the processing method compound table.
Background
Uncalibrated...
This Information Applies To: Agilent OpenLab CDS 2.x
Issue
This article outlines the procedure on how to quantify the uncalibrated compounds in OpenLab CDS 2.x when the analytical method requires a fixed response factor.
Background
Uncalibrated...
This Information Applies To: Agilent OpenLab ChemStation Edition Software (C.01.xx)
Issue
When your Agilent OpenLab ChemStation Edition software fails to launch with errors " Login failed with the following message: Configuration system failed to...
This Information Applies To: Agilent OpenLab ChemStation Edition Software (C.01.xx)
Issue
Agilent OpenLab ChemStation Edition software fails to launch with error containing the words " Autostart Macro failed ”. This article will provide you some...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer and Oligo Pro II instruments, and their respective controller software.
Issue Failed to build pressure error comes up shortly after starting a separation...