This is a discussion with Rob Dejong, Agilent's Micro GC Product Manager. We discuss hydrogen energy and how the Micro GC can be used to analyze hydrogen fuel blended with natural gas. Hydrogen energy is an exciting topic as it is a big part of the green…
Hi aline.castilla-vitkovsky
Better to create the methods in the 8890 from the default method, (default.m).
If the version of the software are different you may have problems with it.
Thanks
Regards
Support and educational resources for VWorks Automation Control Software for Liquid Handling including VWorks Standard and VWorks Plus (compliance-enabled).
Support Documents
Automation Solutions Help and Learning
Automation Software and Devices…
Hello,
Agilent stopped supporting Galaxie in 2014 so we no longer provide the software. Attached was the note announcing the discontinuation. OpenLan CDS 2.x can support certain versions of the 490 GC. You might also have options with OpenLab EZChrom…
Hi Chelsea!
That column was hidden. I didn't even know there were more columns available there and, sure enough, the "Level 1" was missing. Not sure what happened to it, but that's an easy fix.
Thank you for your help!
Jacob,
I am new to chemstation software and trying to learn it. I am having the same problem using the same method. I am testing hemp. Did you figure out why you were getting incorrect potency? Also, are you using (Multipliers = 20, 20. Dilution factors…
It is less volatile, but should work from your aqueous medium. Incubation temperature 80-90 °C, incubation time 10-20 minutes. With a SPME PDMS fiber (10%) you could even improve it more.
Hi Nadjan, I have some good news . I ordered a drain management kit G4267-68708. I replace the only washport in G7167A, and it successfully completed the autoreferencing. You were right, it is all due to washport, I did not change the whole drain kit…
This Information Applies To: Agilent 7890/7820 GC Systems with SSL, MMI, PTV, or VI inlets.
Issue
Split vent trap replacement is recommended as part of the scheduled preventive maintenance. Sometimes, it has to be replaced when the inlet pressure...
This Information Applies To: Agilent LC pumps
Issue:
Stuck or obstructed check valves (Active Inlet Valve (AIV), Passive Inlet Valve (PIV), Outlet Ball Valve (OBV)) can cause issues such as no-flow or no-pressure, moderate to strong drops in pressure...
This Information Applies To: Agilent 1260 Infinity II multisampler, 1290 Infinity II multisampler, 1260 Infinity II SFC multisampler, and 1260 Infinity II bio-Inert multisampler
Issue
The needle bends while moving to the wash port or showing one...
This Information Applies To: Agilent OpenLab CDS 2.x
Issue
This article outlines the step-by-step instruction on how to overlay chromatograms for OpenLab CDS 2.x
Steps to Follow
Load data from result sets or single samples. See Load or add...
This Information Applies To: Agilent Lab Advisor Software, Agilent Multicolumn Thermostat
Issue:
Agilent Lab Advisor is a great tool to diagnose the issue of your HPLC. Running the tests that are relevant to your specific issue in the Service &...
This Information Applies To: Agilent OpenLab CDS (ver 2.x)
Content:
The following procedure shows how to review completed injections in a running sequence in OpenLab CDS (ver 2.x).
Steps to Follow:
Select the sequence from the Run Queue...
This Information Applies To: Agilent Liquid Chromatography (LC) systems
Issue:
Shutting down the HPLC for a long period requires following this general procedure to prevent damage to the system and the column.
Steps to follow:
Store the...
This Information Applies To: Agilent G7129A/B Autosampler with Sample Thermostat/Cooler G7167-60101 or G7167-60005.
Issue:
The autosampler may stop working from time to time, potentially giving off loud noises and switching off the light. The only...
This Information Applies To: Agilent 5977A/B GC/MSD with EI source, EI Extractor Source, or CI Source.
Issue:
During normal operation of the GC/MSD, the source will require cleaning. It is time to clean the source when:
There is a loss in analyte...