Hi
Check ALS and MS are ready or not..If ready and still problem then check cable from backside of GC as well as check cable communication hub( if used )..
You can also check this article in the Agilent Knowledge Portal: Agilent OpenLab ChemStation Autostart Macro Failed Error - Chromatography Software Articles - Chromatography Software Portal - Agilent Community
I'm using Agilent LC-MS/MS 6490 for multiresidue pesticide analysis. I'm having an issue where sometimes the instrument would not run the sequence and goes to idle (not always, but it can happen in the middle of sequence). The error is "Failed to download…
using ChemStation for HPLC 1260 infinity. Get the "ChemStation failed to initialize and will shut down" error. Already tried renaming the user.config file and it still did not work. any help would be appreciated. using Windows 7 ryoboyle thanks!
I remember hearing about a big cost saving in air / hydrogen when the 6890 came out.. There was no way to shut off the 5890 gc gaases at the end of a run. I think it was about 5000 a year if you shut off the air / h2 / makeup gas at the end of the run…
Hi there, had the same problem after the winter holidays. Nothing had been changed in the system at all. The solution was THE FIREWALL. After i checked the "trust this network connection" in my Antivirus software it started with no problems.
Hey First you need to Restart all Agilent Services, and TCP/IP and also set windows update on disable mode..
Then Reconfigure the instrument...
It should work..
I tried it too..
If this will not work you can check logs C:\Program Data\Agilent…
When I clean the local where the sample is placed and ask him to collect the background, the following message appears: "The clean check has failed. Please ensure these is no sample on the sensor and that it is open. Do you want to override the clean…
This Information Applies To: Agilent 8890/8860 GC Systems with SSL, MMI, PTV, or VI inlets.
Issue
Split vent trap replacement is recommended as part of the scheduled preventive maintenance. Sometimes, it has to be replaced when the inlet pressure...
This Information Applies To: Agilent 6000 Series LC/MS systems equipped with MS40+ rotary vane pumps
Issue
Instructions on how to replace the filter in an Agilent MS 40+ pump as part of annual pump maintenance
Background
The filter in the...
This Information Applies To: Agilent ICP-OES 5000 Series (5100/5110/5800/5900) with ICP Expert 7.5.x Software
Issue
The Recommended Routine Maintenance Schedule does not adjust for the number of samples analyses or the sample matrix, both of which...
This Information Applies To: Agilent 7890/7820 GC Systems with SSL, MMI, PTV, or VI inlets.
Issue
Split vent trap replacement is recommended as part of the scheduled preventive maintenance. Sometimes, it has to be replaced when the inlet pressure...
This Information Applies To: Agilent LC pumps
Issue:
Stuck or obstructed check valves (Active Inlet Valve (AIV), Passive Inlet Valve (PIV), Outlet Ball Valve (OBV)) can cause issues such as no-flow or no-pressure, moderate to strong drops in pressure...
This Information Applies To: Agilent 1260 Infinity II multisampler, 1290 Infinity II multisampler, 1260 Infinity II SFC multisampler, and 1260 Infinity II bio-Inert multisampler
Issue
The needle bends while moving to the wash port or showing one...
This Information Applies To: Agilent OpenLab CDS 2.x
Issue
This article outlines the step-by-step instruction on how to overlay chromatograms for OpenLab CDS 2.x
Steps to Follow
Load data from result sets or single samples. See Load or add...
This Information Applies To: Agilent Lab Advisor Software, Agilent Multicolumn Thermostat
Issue:
Agilent Lab Advisor is a great tool to diagnose the issue of your HPLC. Running the tests that are relevant to your specific issue in the Service &...
This Information Applies To: Agilent OpenLab CDS (ver 2.x)
Content:
The following procedure shows how to review completed injections in a running sequence in OpenLab CDS (ver 2.x).
Steps to Follow:
Select the sequence from the Run Queue...