Mike,
It is possible in later versions, but I think in 2.5 that may not be available. If you do not see it in the list, then it was not added to that version. You can use CC to back calculate the values from the compound amount, concentration, multiplier…
It was on the equipment, you can check to be sure by running a performance check on the chiller. Our chiller passed all points on the performance check but failed on the ICP system.
Hi Ajgor,
I am trying to something very similar to what you were doing with your 6890. I have been having some issues getting a response from the machine (using a HyperTerminal PuTTY) and was wondering if you had any tips for troubleshooting this. …
Hey everyone,
I'm looking for some help regarding some communication issues we're experience on the QQQ 6470 after starting it up. Upon starting the QQQ up after a temporary shut down, we are now having troubles with initializing communication and unable…
Is the tutorial available for the " Cary WinUV (Pharma) software complements the Cary 60 UV-Vis spectrophotometer" software? Could we use the WinUV 5.3 Tutorial for the WinUV 5.1.3 software where the tutorial does not work for us because it's written…
Hello, Jorge! Have you ever try to change gain? Go to Gain Adjust e try to put close to 25000. If it still continue red, try to purge your IR with nitrogen gas. If you prefer to speak in pt-br send me a mensager.
Sudhini , increasing the Electron Multiplier Voltage (EMV) will increase the detector response for all analytes.
Depending on the m/z of your impurity vs what you are filtering on in the MRM, your impurity may not be detected as it would need to have…
This Information Applies To: Agilent 6850, 6890, 7820, 7890, 8850, 8860, 8890, Intuvo 9000 GC Systems with a Thermal Conductivity Detector (TCD)
Issue
The TCD temperature, column (carrier), makeup, and reference flow rates need to be optimized to...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Issue:
This article explains how to install the Agilent 2100 Expert software and connect a PC to an Agilent 2100 Bioanalyzer system.
Steps to follow:
The latest version of...
This Information Applies To: 2100 Bioanalyzer systems, 2100 Expert software
Issue: W hen trying to launch the Agilent 2100 Expert software, the process aborts and the user sees run-time error message :
Run-time error '50003 ' often indicates...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Issue
The DV 200 score is a quality score for evaluating quality of RNA derived from formalin-fixed paraffin-embedded (FFPE) samples established by Illumina Inc. in 2016. It represents...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software without Security Pack addon
Issue
The 2100 Expert software gives a counter mismatch error in the log book which may lead to data loss (blank lanes). Specifically...
This Information Applies To: Agilent ICP Expert software.
Issue
The software version is often asked and is a valuable information: to see if any updates are needed, if certain options are available etc.
Steps to Follow
Launch ICP Expert...
This Information Applies To: Agilent OpenLab CDS
Issue
This article provides step-by-step instructions to calculate peak-to-valley ratio in OpenLab CDS.
Background
The peak-to-valley ratio is calculated to indicate the quality of peak separation...
This Information Applies To: Agilent 6500 Series Q-TOF LC/MS systems, MassHunter Workstation 10.1 or below and MassHunter Workstation 11.0 .
Issue
Fully reset the Q-TOF LC/MS system via a power cycle without venting. For users who experience slow...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, and Oligo Pro II systems
Issue
The volume of sample used by Agilent parallel capillary electrophoresis systems during a run.
Resolution
The...
This Information Applies To: Agilent 2100 Expert software, 2100 Expert Security Pack, 2100 Bioanalyzer
Issue
When opening the 2100 Expert software and using the Security Pack, the error message " Start of launcher application failed - The requested...