Hello MargaretRBaker ,
Compounds can be imported by pasting them in the Acquisition Parameters section of your method. I would recommend manually adding a compound first and then copying and pasting that into your spreadsheet to create a template. Then…
I’m trying to configure the external event connectors #5 (pin 1 and 3) and #6 (pin 2 and 4) to trigger a DAQ. I’m currently testing the flow logging but I am stumped. I have an 8 pin mini DIN from external event output with wires corresponding to pins…
Explore Agilent 5977 GC/MS, 7000E GC/TQ, 7010C GC/TQ, and 7250 GC/Q-TOF resources.
Collection of 5977 GC/MS Resources
Collection of 7000E and 7010C GC/TQ Resources
Collection of 7250 GC/Q-TOF Resources
Are you awaiting the arrival of a new…
Hi I work on qTOF 6546.
Accoring to the "F1- help" in Mass Hunter for 6546 model I can not use the slicer position in high sensitivity mode. The same information was itroduced in one of Agilent webminars.
However on Agilent comminity I got answers…
HI Jheds,
do you use a TOGA Analyzer or have you setup the system yourself? An Analyzer needs retuning of everything after changing a column, etc.
Regards,
Norbert
This Information Applies To: 2200/4200/4250 TapeStation systems, TapeStation D1000 ScreenTape assay, TapeStation High Sensitivity D1000 ScreenTape assay, TapeStation analysis software
Issue:
A sharp peak appears at the lower end of the NGS library...
This Information Applies To: Agilent Variable Wavelength Detector G1314x and G7114A/B modules.
Issue
As UV deuterium lamps ages, the light intensity decreases, the sensitivity of detection may deteriorate. Replace the lamp when the intensity test...
This Information Applies To: Agilent 6850, 6890, 7820, 7890, 8850, 8860, 8890, Intuvo 9000 GC Systems with a Thermal Conductivity Detector (TCD)
Issue
The TCD temperature, column (carrier), makeup, and reference flow rates need to be optimized to...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Issue:
This article explains how to install the Agilent 2100 Expert software and connect a PC to an Agilent 2100 Bioanalyzer system.
Steps to follow:
The latest version of...
This Information Applies To: 2100 Bioanalyzer systems, 2100 Expert software
Issue: W hen trying to launch the Agilent 2100 Expert software, the process aborts and the user sees run-time error message :
Run-time error '50003 ' often indicates...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Issue
The DV 200 score is a quality score for evaluating quality of RNA derived from formalin-fixed paraffin-embedded (FFPE) samples established by Illumina Inc. in 2016. It represents...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software without Security Pack addon
Issue
The 2100 Expert software gives a counter mismatch error in the log book which may lead to data loss (blank lanes). Specifically...
This Information Applies To: Agilent ICP Expert software.
Issue
The software version is often asked and is a valuable information: to see if any updates are needed, if certain options are available etc.
Steps to Follow
Launch ICP Expert...
This Information Applies To: Agilent OpenLab CDS
Issue
This article provides step-by-step instructions to calculate peak-to-valley ratio in OpenLab CDS.
Background
The peak-to-valley ratio is calculated to indicate the quality of peak separation...
This Information Applies To: Agilent 6500 Series Q-TOF LC/MS systems, MassHunter Workstation 10.1 or below and MassHunter Workstation 11.0 .
Issue
Fully reset the Q-TOF LC/MS system via a power cycle without venting. For users who experience slow...