Thanks for the feedback. I have re-optimized the lamp alignment, but I didn’t get much (if any) improvement. I also made some adjustments to the sample position, which I think helped a little. I think some users have been fiddling with the sample position…
Hi community,
maybe someone has an idea what I could do, before a technician comes over.
During my absence my colleagues told me that our HPLC (1260 Vialsampler, 1260 Inf II Flex pump, TCC, FC-AS, DAD) does show a peak shift of about 3 to 10 minutes…
So just to let everyone know, the SSD on this computer has now already failed. Seems like there was something wrong with the hardware to start with !. Let's hope a new SSD will fix this issue. -Francois
This is a chromatogram of my high standard, Still haven't gotten to the low. Note that this is actually just one compound injected on the sorbent tube. The compound is methyl methacrylate. The tube is Carbopack B,X. The library identifies the compound…
Hello, I apologize for the delay. A lot of times, autostart macro failed errors are caused by corrupt instrument config files. Try resetting the instrument configuration files in the instrument folder (\Chem32\x\, where x is the number of the instrument…
This article is a compilation of Frequently Asked Questions (FAQs) for Agilent's consumable products in the Chemistries and Supplies Division (CSD). FAQ categories include Filaments and Ion Sources , Gas Management, GC Columns , General , Inlets & Liners…
Hello, Is there an update available for the Chemspider library editor script? The script is named DownloadMolfilesFromChemspider.libedit and as the name suggests, downloads the mol files for each library entry from chemspider. The chemspider API appears…
Hello, Since each compound in your processing method would require a different resolution pass/fail threshold, I do not believe you would be able to set this up solely from the column properties on your intelligent report. I approached this by storing…
The Agilent Equipment Qualification Plan (EQP) for OQ is freely available on the Agilent website for potential customers to review. I have attached the standard EQP OQ for GC
Sounds like the Cap EPC module or the EPC Pneumatics board may have failed. Do you have two Cap Inlets? If so. You can swap the two EPC Modules to see if that changes anything. I would lean towards the EPC Module has failed.
How to Reset the GC/TQ Tune File to Default Values
Multiple Results
This Information Applies To: Agilent 7000A/B/C/D Triple Quadrupole GC/MS systems
Issue
When a triple quadrupole GC/MS system tune fails, the user can check for any abnormalities by setting the tune file to default tune file before checking for hardware...
This Information Applies To: Agilent ICP-OES 5000 Series (5100/5110/5800/5900)
Issue:
The ICP-OES and AVS 6/7 components require regular routine maintenance. Agilent-authorized field service engineers must perform any maintenance procedures not...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, OligoPro, and ZAG DNA Analyzer
Issue
Perform a capillary alignment whenever a new array has been installed on an Agilent Parallel Capillary Electrophoresis instrument...
This Information Applies To: MSD productivity ChemStation E.XX.XX and F.XX.XX
Issue
A setup method for MSD Productivity ChemStation E.XX.XX and F.XX.XX users who want to stop printing results automatically after sample analysis.
Steps to Follow...
This Information Applies To: Agilent MassHunter 11 and later
Issue
Generating Acquisition Desktop and Quantitative Analysis shortcuts.
Steps to Follow
Double-click the Control Panel icon on the desktop or select Windows Start menu > Agilent...
This Information Applies To: Agilent MassHunter Workstation for LC/TQ and MassHunter Workstation for LC/TOF and LC/Q-TOF
Issue
How to view the MassHunter Data Acquisition Software Logs entries, change settings, and export the Logbook for archiving...
This Information Applies To: ICP-MS MassHunter with User Access Control (UAC)
Issue
It is necessary to update the database folder path in Change User Access Control:
After creating a new database in SDA with ICP-MS MassHunter.
To view a batch...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Over time, the electrodes may become pitted or eroded and users may see a decrease in precision or begin to experience the "Tube fault" error when new tubes are installed. If...
This Information Applies To: Agilent GTA Furnace and Flame Instruments, Agilent 240FS/240GFAA/GTA120/PSD120
Issue
There may be occasions when users need to remove GTA furnace center block workhead (instruments with both Flame and Furnace capabilities...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
The shroud should be replaced annually, or when there is evidence of damage caused by mechanical shock or contamination from liquid spillage.
Items Required
Shroud Removal...