The Digest of upcoming webinars has been updated as of February 20.
Notable additions include:
BioPharma (1)
GC & GCMS (2)
Pharma (1)
Software & Informatics (21)
Check Out:
Tips and Tricks Workshop on ICP-OES: Smarter Method Development…
Hello LabNewbie ,
The order and the location of the filters will determine how the tables are extracted, so you need to make certain that the filter is done in the correct binding and in the correct order.
In general for issues like this I would go…
I figured it out. I first deleted all 3 racks from TrayHolder1, then installed the R60 (as rack 1). I had to power cycle the PAL for the changes to take effect.
Hi oguzhan
That sounds about right to me. It probably says more about the set up of the manual seal wash on the 1260s being always on once you have set up the periodic mode, vs the automatic set up on the 1290s which I assume only runs when the pump…
Hello! In trying to set up an automated data analysis for a GCMS, the option for adding a "DA Report Template" column to a sequence in Masshunter (10.0.10305.0) is not available for the column option menu. Any help would be appreciated. Thank you.
Hello Farzana_Yeasmin ,
I don't think there is a way on your end. Usually the valve diagrams are provided during the installation, to my knowledge.
It is worth mentioning that any customer at any point can change the configuration. In this case, the…
Laboratory scientists across the world are being invited to have their say in the 2023 SelectScience Scientists’ Choice Awards ® !
The annual Scientists' Choice Awards celebrate the most innovative and effective technologies of the past year and provide…
Hi Sblev45
Not really an answer to your question, but more of a comment on the injector program. If you have a loop of 500uL in the needle seat and you're pushing 300uL water at maximum speed into the loop, I wonder if you will lose some of your analyte…
This Information Applies To: Agilent GC Systems
Issue
This test isolates the point of contamination to the sample introduction system, which includes the gas supply, gas supply lines, and the sample inlet. It does not include the syringe or autosampler...
This Information Applies To: Agilent GC systems
Issue
Peak tailing is present in a chromatography peak when it has an excessive asymmetry with a trailing edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
T his Information Applies To: Agilent 8890/8860/7890/7820/6850/6890 GC Systems with TCD (Thermal Conductivity Detector)
Issue
Problems observed with thermal conductivity detector (TCD) results can have different underlying causes.
Resolution...
This Information Applies To: All GCs, 6890, 6850, 7890, 7820, 8890/8860, Intuvo 9000
Issue:
This article is a troubleshooting guide for when the Flame Ionization Detector (FID) does not ignite or the flame keeps going out.
Cause:
If the FID...
This Information Applies To: Agilent GC Systems with Flame Ionization Detector (FID)
Issue:
The Flame Ionization Detector (FID) jet could become clogged with ferrule material, column bleed, or heavy molecular analytes. The clogged jet will affect...
This Information Applies To: Agilent GC Systems with Split/Splitless (S/SL) inlet
Issue
Different liners are required for different high concentration, split analysis techniques including:
General use liners
Auto inject, general use
Auto...
This Information Applies To: Agilent GC Systems with Split/Splitless (S/SL) inlet
Issue
Different liners are required for different splitless trace analysis techniques including:
General use liners
Pressure, temperature, volume (PTV)
Hot...
This Information Applies To: Agilent 6890, 7890, 7820, 8890 and 8860 GC Systems with Split/Splitless (S/SL) inlet
Issue
Replacement of the Gold Seal is required as part of inlet maintenance. Replacement is required when the performance of the inlet...
This Information Applies To: Agilent GC Systems with Micro-ECD.
Issue
The Wipe Test is an annual test that performed by end user of the micro-ECD (Micro Electron Capture Detector or uECD) to help ensure radioactive safety when using the detector...
This Information Applies To: Agilent GC Systems with thermal conductivity detector (TCD)
Issue
Baking the thermal conductivity detector (TCD) at high temperatures can remove sample contaminants that have deposited on the detector surfaces.
Items...