Hi ,
I have try the method (Isocratic) on the different lines (A,B,C,D) and compare the results . It appear that there was a difference (shift in retention time about 2 mins) in the result were line (A) is used in the method . Thus the problem might…
Dissolution testing is labor intensive as well as a technique and time dependent analytical procedure. A typical dissolution workflow consists of several steps including dissolution media preparation, media filling, introducing the dosage form into the…
Hello all, What is the difference between the IntelliQuant / no IntelliQuant mode in SemiQuant (QuickScan) ? When I activate this option, the LOQ are modified.
In IntelliQuant mode, the LOQ is calculated according to TDS in sample ? Thanks in advance…
CBM said: As you state, the MessageBox.Show() act as if modeless - but the MessageBox.Show() is not modeless, I don't know the correct term, but something with Threads and Async... And in Visual Studio you likely have a common parent, that makes it act…
Here is a "best of" collection of links to manuals and tools for ICP-MS on Agilent.com.
ICP-MS Hardware Troubleshooting & Maintenance Resources
Technical Overview
Agilent ICP-MS Resource Library
Troubleshooting Tool for ICP-MS Sensitivity…
Here is a "best of" collection of links to manuals and tools for the A gilent Microwave Plasma Atomic Emission Spectrometer (MP-AES) , MP Expert Software, and MP-AES accessories and consumables.
MP-AES User Guides
Agilent 4210 MP-AES User’s Guide…
Here is a "best of" collection of links to manuals and tools for Agilent Atomic Absorption Spectrophotometers (AAS) , SpectrAA Software, and AAS accessories and consumables.
AAS User Guides
Instruments
Agilent 55B AA Spectrometer User’s Guide…
Hello jeremy_lai ,
In your latest expression you have removed the first check to see if there is a qualifier peak present. You need to change your first if statement to read as you had it in your previous post.
if BoundItems[“QualifierPeak”] is None…
Hello Yasar ,
To switch from an MRM method to dMRM in acquisition you must have acquired an MRM data file that can be successfully processed in Quant. If for whatever reason the data file cannot be processed in Quant, then you will receive the error…
This Information Applies To: Agilent GC Systems with Flame Ionization Detector (FID)
Issue:
The Flame Ionization Detector (FID) jet could become clogged with ferrule material, column bleed, or heavy molecular analytes. The clogged jet will affect...
This Information Applies To: Agilent GC Systems with Split/Splitless (S/SL) inlet
Issue
Different liners are required for different high concentration, split analysis techniques including:
General use liners
Auto inject, general use
Auto...
This Information Applies To: Agilent GC Systems with Split/Splitless (S/SL) inlet
Issue
Different liners are required for different splitless trace analysis techniques including:
General use liners
Pressure, temperature, volume (PTV)
Hot...
This Information Applies To: Agilent 6890, 7890, 7820, 8890 and 8860 GC Systems with Split/Splitless (S/SL) inlet
Issue
Replacement of the Gold Seal is required as part of inlet maintenance. Replacement is required when the performance of the inlet...
This Information Applies To: Agilent GC Systems with Micro-ECD.
Issue
The Wipe Test is an annual test that performed by end user of the micro-ECD (Micro Electron Capture Detector or uECD) to help ensure radioactive safety when using the detector...
This Information Applies To: Agilent GC Systems with thermal conductivity detector (TCD)
Issue
Baking the thermal conductivity detector (TCD) at high temperatures can remove sample contaminants that have deposited on the detector surfaces.
Items...
This Information Applies To: Agilent GC Systems with flame ionization detector (FID)
Issue
Baking out the flame ionization detector at high temperatures can remove sample contaminants that have deposited on the detector surfaces.
Items required...
This Information Applies To: Micro Electron Capture Detector (uECD)
Issue
Baking the micro electron capture detector (µECD) at high temperatures can remove sample contaminants that have deposited on the detector surfaces.
Warning ...
This Information Applies To: Agilent GC Systems with Flame Ionization Detector (FID)
Issue
This article will describe how an operator can configure the makeup gas on both the instrument keypad and the software driver (Method Editor).
Background...
This Information Applies To: Agilent HPLC systems
Issue
The presence of ghost peaks can be a symptom of a system contamination issue, caused by accumulation of sample and/or foreign substances in the flow path. It is critical for high sensitivity...