Problem: Unable to perform Instrument Configuration for Agilent 1290 LC. The instrument pings at IP address 192.168.254.11 with NO packet loss and connects fine in Agilent Lab Advisor software. Able to perform instrument commands in Lab Advisor.
However…
Hi, I am using a batch file to reprocess data under a different method. The integration and events table look correct on the screen. I have adjusted all of the batch settings options, but the final report only includes the sample information without any…
Date and Time: 07/07/2019 07:26 Program: Agilent MassHunter Workstation Software Qualitative Analysis B.03.01 Build Configuration: Release Message: Retrieving the COM class factory for component with CLSID {4CBCEED8-D9F8-4440-A127-4E840D0573DF} failed…
Hi Everyone,
Please can you help me. We have been having repeatability problems on the HP7890B for a long time and can't get to the bottom of it. Analysing for VOC. I have run lots of RSD measurements (10 injections). A common thing we are seeing…
After most MSD maintenance (filament change/switch, source cleaning, etc...) I seem to have an issue with the baseline dropping in series (offset pattern) for up to 2 weeks afterwards. I'm new to this machine, but I'm in the process of slowly changing…
I looked around but failed to find anything useful. Is there somehow possible to export results/data from SureMass-deconvolution/ID in Unknowns Analysis for further processing and or statistical analysis (besides .CEF-format)?
What are the typical use cases of the Resolve handheld Raman analyzer?
Resolve is a highly sensitive handheld Raman-based chemical identification system that offers real-time detection and identification of unknown military, commercial and homemade…
Hello all I'm looking at designing some standby methods for my 4 GC-FIDs and 3 GC-MSs as they are often sitting idle for 3/4 days a week and are happily consuming helium, hydrogen and generally sucking money away basically for no reason. Turning them…
Hi there, I've recently started using a GCMS (7890A + 5975C MSD). The tune has failed and the GC shows a flat line at 0.5 whenever a sample is run. I've attached all relevant photographs I could think of, including the GC spectra where it all stopped…
I've recently been running into some problems with performing SureMass conversion of data collected on a 6546 LC-QTOF. I'm collecting both profile and centroid MS data using the default data storage thresholds.
Initially, I was running SureMass conversion…
This Information Applies To: All Agilent 6000 Series LC/MS Systems without a gate valve for ion capillary installation/removal. For instructions for removing an ion capillary on LC/MS instruments with a gate valve installed, please click here
Issue...
This Information Applies To: Agilent 6000 series LC/MS instruments
Issue:
Cleaning the ion transfer capillary as part of regular maintenance or as part of troubleshooting when a loss of sensitivity in the instrument occurs.
Steps to follow ...
This Information Applies To: Agilent 6000 Series LC/MS systems.
Issue
Efficient electrospray ionization (ESI) in your LC/MS ion source requires a properly adjusted nebulizer needle in good condition. The nebulizer needle is a consumable item in...
This Information Applies To: Agilent 6000 Series LC/MS systems.
Issue
Checking and adjusting the nebulizer needle is part of regular maintenance or troubleshooting tasks. It is suggested when there is an issue with nebulizer spray shape or spray...
This Information Applies To: Agilent Single Quadrupole LC/MS systems controlled by OpenLab CDS software
Issue
How to check and recognize the current Instrument Status of your 6100 Series and InfinityLab LC/MS systems using OpenLab CDS software....
This Information Applies To: Agilent LC/MS Systems
Issue
Contamination of the tune mix or the Calibrant Delivery System (CDS) of your LC/MS system can cause Autotune failures and drops in sensitivity due to ion suppression.
Items Required...
This Information Applies To: Agilent LC/MS Systems
Issue
When there is suspected contamination of the CDS, low tune response, or possible blockage in the CDS, flushing the Calibrant system may be required.
Warning : This procedure risks...
This Information Applies To: Agilent LC/MS System
Issue
Instructions on how to check the level of calibrant in your LC/MS system, and refill the calibrant bottle if necessary.
Requirements
Checking the level of calibrant should be performed...
This Information Applies To: Agilent 6100 Series LC/MS Instruments
Issue
Instructions on how to fill the calibrant bottle in Agilent 6100 Series LC/MS Instruments when calibrant levels are running low.
Background
The ability to autotune your...
This Information Applies To: Agilent 6000 Series LC/MS systems
Issue
The article details the correct tuning mix to use according to your LC/MS system and the source type installed on your system. In cases where Agilent tuning mixes need to be diluted...