I have a 6890N GC-FID with a 7683 Series ALS and I'm using Agilent Open Lab (EZChrom Edition) software. The software won't trigger the autosampler to make an injection. A box appears on the screen with the message 'Incompatible Tray'. I have verified…
Hi, We observed an error during autotune of QQQ GCMS as "Peak width gain failed", When it was occurred and what is the reason for the repeat error, Autotune was not completed due to " Peak width gain failed". Please suggest the recommendations and possibility…
Hi Chris and Chelsea,
thanks for your detailed answeres. I tried the suggested fixes and so far did not managed to reestablish a connection between PC and ICP-MS also after resetting the IP address of the ICP-MS. The computer detects that there is a…
Hi, In Masshunter 10, for a 6470 QQQ is it possible to have your worklist display the time that each injection will start and finish, or failing that, the time/date that your worklist is due to complete. Thanks - John. ross
I am now using the HPLC infinity 1260 with the software Openlab (Version A.01.02), the software shows an EMF now as shown in the attached photo. I know EMF means Early Maintenance Feedback, but what should I do to deal with it. I tried to find some useful…
OK, first you need to increase your read time to at least 30 seconds, preferably 60 seconds. At 10 seconds, you are probably not seeing a peak for the 5ppb standard, which is why your calibration is failing (not linear). How low are you trying measure…
Would you like an easier way to find the consumables for your Application or Workflow? We have created Send-a-Lists that will load into the Favorites section of your Agilent.com account. You can add or delete items to customize it for your situation.…
Hi mazarakis, I do not see an advanced operation manual published as of yet. I have attached the 8890 Operation Manual in case this helps. Regards James
Hello all,
We are running a GC/MS 5977A/7890B in our lab. Last week, after cleaning and reinstalling our Extract EI source, the system pumped down normally, but the GC gave a "Thermal Shutdown" message. Under status, it read "Thermal Aux 2 Open Sensor…
I have an Agilent 5975C MSD and 7890A GC that I'm getting a failed PING test on. I've done the troubleshooting I can (reboot system in proper order, reboot PC). I can ping the main IP but the ones going to the instruments fail. Please advise. PC is running…
This Information Applies To: Agilent OpenLab ChemStation
Issue
When launching OpenLab ChemStation Online or Offline session, the following error messages “ ChemStation ChemMain has stopped working ” or " There is a problem with Adobe Acrobat/Reader...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Agilent Femto Pulse, Agilent ZAG DNA Analyzer
Issue: The instrument encounters a run error, Run Aborted, Position fault: Did not reach target Z position ( Figure 1 ) . This error...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG, Oligo Pro II
Issue:
This article explains the steps to take after installing a brand new array in the Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG, and...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer systems, RNA kit (15 nt) (p/n DNF-471-0500/1000), HS RNA kit (15 nt) (p/n DNF-472-0500/1000), Small RNA kit (p/n DNF-470-0275)
Issue
Which kit should be used to analyze single...
This Information Applies To: Agilent 6820, 6890, 7820A GC systems with a Split/Splitless (SSL) inlet
Issue
Non-volatile sample matrix components will accumulate in the inlet liner and impact on analytical performance. The inlet liner should be changed...
This Information Applies To: Agilent headspace samplers (HS)
Issue
GC cycle time needs to be calculated correctly. Too short a GC cycle time will reduce sample quality and possibly stop the analysis prematurely. Too long GC cycle time can cause...
This Information Applies To: Agilent 7820A GC
Issue
7820A GC is designed with simplified keypad that comes with five buttons. They are Stop, Prep Run , Start, Up and Down arrow buttons. Changing the IP address requires a different method compared...
This Information Applies To: Agilent Single Needle Autosamplers
Background
Sometimes the user may observe liquid flowing from Port four on the autosampler injection valve. During an injection sequence, it is normal to have liquid from port four...
This Information Applies To: Agilent 4200, 4150, 2200 TapeStation systems
Issue
Can I run an assay using the ladder or sample buffer from a different assay if I have run out of the appropriate assay ladder or sample buffer? Is it possible to run...
This Information Applies To: Agilent ICP-MS 7700, 7800, 7850, 7900, 8800, and 8900 systems
Issue
Peristaltic pump tubing that has lost its elasticity will not deliver the sample to the nebulizer correctly. When the pump tubing appears limp or flattened...