I have configured my laptop to our 8890 GC with a split/splitless inlet and FID. I am currently just doing manual injection. When sending the method from my laptop to the instrument, all of the parameters reach the setpoints except for my column temperature…
Hello Agilent Community Our Zero Air / Nitrogen generator from Parker Balston broke down and it has been discontinued. The supplier does not offer replacement parts and they do not longer have a gas generator model with the combination Air/Nitrogen. Therefore…
Hello.
I'm hoping to seek some help for a problem I've been experiencing. We currently run a GC-FID with a headspace sampler testing for Acetic Acid, Propionic Acid, and Butyric Acid. I've been having issues reading the acetic acid consistently. Any…
Hi everyone!
I have brand new PGC Yokogawa 8000 equipped CP-Chirasil-Dex CB Columns with FID detector and Liquid Sample Valve (LSV) set at 170C deg. The problem is GC can’t separate m-Xylene from p-Xylene in low concentrations.
Component name…
Hi Crystalnipp (great username!!) Thanks for the clear answer I do have a question for you. We also run N2 make-up to our FID. As of now we run He and our night standby method is to leave the GC oven at 150°C with 0.5mL/mim He flow. We turn flame and…
Hi!
I've got a SEQ type CC that should be calculated only once during the reprocessing and a peak or group type that uses the result of the SEQ one. Since this the SEQ type CC is calculated inj number * peak number times.... is it possible to avoid…
Hi acraig First replace saptum until if you don't detected leak because sometime tiny leak in saptum cause low sensitivity. Second sometimes over tightening the ferrule connection of column to injector cause constriction the flow and reduce analyte at…
Are these FID issues only with this instrument or with others in your lab as well. If this is only on this instrument it might have to do with the H2 or air EPCs. If it is on other systems as well, you might want to check your instrument air. I have seen…
Larger are the orifices of the cones, particularly the sample cone, more chance you have to get the IF/Bk pressure errors. Usually when the sample cone is too used then is passing too much air or whatever trough it at the interface, and the ICP senses…
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer systems, RNA kit (15 nt) (p/n DNF-471-0500/1000), HS RNA kit (15 nt) (p/n DNF-472-0500/1000), Small RNA kit (p/n DNF-470-0275)
Issue
Which kit should be used to analyze single...
This Information Applies To: Agilent 6820, 6890, 7820A GC systems with a Split/Splitless (SSL) inlet
Issue
Non-volatile sample matrix components will accumulate in the inlet liner and impact on analytical performance. The inlet liner should be changed...
This Information Applies To: Agilent headspace samplers (HS)
Issue
GC cycle time needs to be calculated correctly. Too short a GC cycle time will reduce sample quality and possibly stop the analysis prematurely. Too long GC cycle time can cause...
This Information Applies To: Agilent 7820A GC
Issue
7820A GC is designed with simplified keypad that comes with five buttons. They are Stop, Prep Run , Start, Up and Down arrow buttons. Changing the IP address requires a different method compared...
This Information Applies To: Agilent Single Needle Autosamplers
Background
Sometimes the user may observe liquid flowing from Port four on the autosampler injection valve. During an injection sequence, it is normal to have liquid from port four...
This Information Applies To: Agilent 4200, 4150, 2200 TapeStation systems
Issue
Can I run an assay using the ladder or sample buffer from a different assay if I have run out of the appropriate assay ladder or sample buffer? Is it possible to run...
This Information Applies To: Agilent ICP-MS 7700, 7800, 7850, 7900, 8800, and 8900 systems
Issue
Peristaltic pump tubing that has lost its elasticity will not deliver the sample to the nebulizer correctly. When the pump tubing appears limp or flattened...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
AriaMx touch screen displays error code 90 after the Instrument Health Check (IHC), which happens when the AriaMx is switched on, or after running the onboard diagnostic tests...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx optical modules
Issue
AriaMx users can change which AriaMx optical modules are installed to upgrade the instrument capabilities or to troubleshoot.
Items Required
Any...
This Information Applies To: AriaMx real-time PCR system
Issue
Error 43 is displayed on the AriaMx touch screen. Error 43 is a voltage error and it normally indicates that the cartridge LED voltage or motor voltage being detected is abnormal. Sometimes...