I have the headspace autosampler 7697A attached to a GC 7890A. I have two issues. the first is a growling noise when the gripper moves in the downward motion. Not the entire way just the middle third. I am guessing a service call will need to be made…
Hello,
That will work but what value are you displaying? If you want the logic to be if any injection fail it shows unmet then you would need to store and evaluate the logic. I would have a hidden column that converts met and unmet to 0 and 1. You…
Two instruments are running off the one computer (two cards). One is a 6890N/5973N, one is 6890N/5975 with Gerstel Rail. Neither instrument has an FID, just the one MS detector, so only one signal from each. It doesn't seem to matter if both instruments…
Let me summarize...
Everything that you 've shared with us ALAZ looks perfectly normal, except the calibration on one of the FID channels doesn't show all of the calibration levels.
I'm now completely out of ideas. You've done everything that I would…
Hello, Finally we were able to resolve, for some reason the scheduled task that is supposed to generate the certs at startup was failing. Recreating and running the task fixed the certificate after rename issue, and now the client is able to connect to…
Hi All,
I was trying to perform the Sampler Leak Test on the G7167B 1290 Multisampler. Whenever it reaches the last portion of the leak test (Blindseat leak measurement) the pressure just could not build up and the whole Sampler leak test will fail…
Hello,
Please try replacing the torch. If that does not resolve your issue, please contact Agilent customer support to begin the process of opening a repair service order. It is possible that your waveguide has failed. Have a great day
Hello MarKon ,
Those the only options I would be familiar with and I can recommend.
The calibration indeed seems to only address the sample transfer from tray to turret, and I don't imagine it has anything to do with the Gripper. Since you are…
Hi Marty,
After transferring the CC file, I linked it to my processing method and reprocessed all data. There are no errors after processing. By broken, I mean that the values are not showing up/blank in my injection results (and also in my custom report…
This Information Applies To: Agilent Atomic Absorption Spectroscopy Systems (240/280 Series Flame AA and 240/280Z/Zeeman/GTA 120 Graphite Furnace)
Issue:
This article includes recommended maintenance procedures to be performed daily, weekly or annually...
This Information Applies To: Agilent SpectrAA Software, Agilent 240/280 Flame Atomic Absorption Systems, 240/280 Zeeman Graphite Furnace Systems
Issue:
How to Reset Lamp Usage Counters or Add a New Lamp in SpectrAA
Caution : All physical...
This Information Applies To: Agilent GTA 120, Agilent 240Z AA Spectrometer, Agilent 280Z AA Spectrometer, Agilent 240FS/GTA120/PSD120/UltrAA System
Issue:
It is important to align the sample probe of the Programmable Sampler Dispenser (PSD) 120...
This Information Applies To: Agilent Flame AA Systems: e.g., 55B, 240FS, 280FS
Issue:
The Flame AA burner and burner components require regular cleaning to maintain system performance. Components include the burner, nebulizer, and spray chamber...
This Information Applies To: Agilent Flame Atomic Absorption (AA) Spectrometers (50/55/240/280 AA)
Issue:
How to clean a blocked nebulizer of a Flame AA, which may be causing low sensitivity or a sample uptake rate below 5 ml/min.
Steps to follow...
This Information Applies To: Agilent Graphite Furnace Systems (PSD 120/GTA 120/240Z AA/280Z AA)
Issue
Maintenance procedure for replacing the syringe and plunger of the PSD 120 sample dispenser for the Agilent GTA and Zeeman Graphite Furnace Systems...
This Information Applies To: Agilent AA (AA240, AA280) with Graphite Furnace Accessory (GTA)
Issue:
The Programmable Sample Dispenser (PSD) requires the sampling probe to be accurately aligned before the PSD can be used.
The PSD enables the...
This Information Applies To: All Agilent AA systems: 55B, 240FS, 280FS, 240Z, 280Z
Issue:
Optimizing the position of the lamp maximizes amount of light from the lamp passing through the optics to the detector, improving the signal-to-noise and the...
This Information Applies To: Agilent VGA 77, AA, VGA 77P, ICP
Issue:
The Agilent Vapor Generation Accessories VGA 77 and VGA 77P use high concentrations acids. The system needs to be thoroughly cleaned after each use.
The Vapor Generation Accessory...
This Information Applies To: All Agilent Atomic Absorption Spectrometry Systems (AA50, AA55, AA240, AA280)
Issue: This article describes when and how to clean an AA burner.
Background
For optimum and safe performance, burners (see Figure 1 ...