I'm trying to install MSD Chemstation(G1701-60160, E.02.02), but error code below poped up and failed to intall it.
-I use VDI at my work place
-Its version Window10
SetupNew|setup.cpp(140)
PAPP:
PVENDOR:
PGUID
|15.0.0.498
@Windows Vista…
Hello hoh ,
I have not seen this error specifically, though this part of the message points to some issue with the chemical structure -
System.ApplicationException: Failed to get chemical structure for CAS = 1000331265; structure database may be corrupted…
Hi Guys, I have a 7980B GC with an external injection valve and FID detector. I am using OpenLab CDS Chemstation Version C.01.09 with Windows 10 (version 1703). Sometimes while running a sequence it fails to save the chromatogram. When you select the…
Hello everyone,
7900 extinguishes plasma when trying to perform Auto RF matching in any mode. Error code: Plasma was shutoff during Analysis (Vacuum), Warning code 2150: Interface Vacuum is too low. Plasma ignition is well. Orifices are in good condition…
Hello ajay_zalavadia , Thanks for sharing your question in the Forum. When you look at the JSON responses where deserialization fails, compared to the responses where it succeeds, are you able to spot exactly what is the inconsistency/differences in the…
Using Quant 12, I am trying to set up a surrogate recovery method for PFAS but I’m not getting a calculated value for Surrogate % Recovery. I have EIS (Extracted Internal Standard) set as surrogates, I have NIS (Nonextracted Internal standards) set as…
azrael, please, for future communication, as this will save us all time! in in initial/first mail: what exactly is the HW? (here it would be GC 7890, FID EPC ...) For efficient problem solving, the REAL problem should be named. If there is also a specific…
This Information Applies To: Agilent Atomic Absorption Spectroscopy Systems (240/280 Series Flame AA and 240/280Z/Zeeman/GTA 120 Graphite Furnace)
Issue:
This article includes recommended maintenance procedures to be performed daily, weekly or annually...
This Information Applies To: Agilent SpectrAA Software, Agilent 240/280 Flame Atomic Absorption Systems, 240/280 Zeeman Graphite Furnace Systems
Issue:
How to Reset Lamp Usage Counters or Add a New Lamp in SpectrAA
Caution : All physical...
This Information Applies To: Agilent GTA 120, Agilent 240Z AA Spectrometer, Agilent 280Z AA Spectrometer, Agilent 240FS/GTA120/PSD120/UltrAA System
Issue:
It is important to align the sample probe of the Programmable Sampler Dispenser (PSD) 120...
This Information Applies To: Agilent Flame AA Systems: e.g., 55B, 240FS, 280FS
Issue:
The Flame AA burner and burner components require regular cleaning to maintain system performance. Components include the burner, nebulizer, and spray chamber...
This Information Applies To: Agilent Flame Atomic Absorption (AA) Spectrometers (50/55/240/280 AA)
Issue:
How to clean a blocked nebulizer of a Flame AA, which may be causing low sensitivity or a sample uptake rate below 5 ml/min.
Steps to follow...
This Information Applies To: Agilent Graphite Furnace Systems (PSD 120/GTA 120/240Z AA/280Z AA)
Issue
Maintenance procedure for replacing the syringe and plunger of the PSD 120 sample dispenser for the Agilent GTA and Zeeman Graphite Furnace Systems...
This Information Applies To: Agilent AA (AA240, AA280) with Graphite Furnace Accessory (GTA)
Issue:
The Programmable Sample Dispenser (PSD) requires the sampling probe to be accurately aligned before the PSD can be used.
The PSD enables the...
This Information Applies To: All Agilent AA systems: 55B, 240FS, 280FS, 240Z, 280Z
Issue:
Optimizing the position of the lamp maximizes amount of light from the lamp passing through the optics to the detector, improving the signal-to-noise and the...
This Information Applies To: Agilent VGA 77, AA, VGA 77P, ICP
Issue:
The Agilent Vapor Generation Accessories VGA 77 and VGA 77P use high concentrations acids. The system needs to be thoroughly cleaned after each use.
The Vapor Generation Accessory...
This Information Applies To: All Agilent Atomic Absorption Spectrometry Systems (AA50, AA55, AA240, AA280)
Issue: This article describes when and how to clean an AA burner.
Background
For optimum and safe performance, burners (see Figure 1 ...