Hi, I don't think it is a fault of the purity of the solvent. This is normal when using acetonitrile. If you are using an iso pump to dose your reference masses, increase the flow rate, as the gradient rises. Another option is to change the mobile phase…
The Digest of upcoming webinars has been updated as of February 28.
Check Out:
Method and Application Review of ASTM D5185 for the Analysis of Used and Unused Lubricating and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry on…
I am not aware of any default 'oxide' conversion in MassHunter.
Titanium requires HF to remain stable in solution. A linear high-bias across the entire calibration range could indicate that titanium was lost (low) in your calibration standards. Easy…
Hello,
I would first try to delete the instrument configuration setting as outlined in the article linked below. It can be difficult to help with issues like this in the community, so I would look at opening a ticket with your local Agilent support…
Hello,
I would check Adobe reader on the system as the first action when having reporting issues. See the article below for version and configuration settings for Adobe reader. If you still have crashing issues with Chemstation after checking Adobe…
This Information Applies To: 4200, 4150 and 2200 TapeStation, TapeStation analysis software A02.02 or higher.
Issue:
When using the Agilent 4200, 4150 and 2200 TapeStation systems, the DV 200 of FFPE RNA samples can be calculated within the TapeStation...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, ProSize Data Analysis Software
Issue
How to export a ladder as a size calibration file and import it into a different run in ProSize.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
It is possible to set up the 2100 Expert software so that the files are automatically exported each time a chip run is complete.
Steps to Follow
To turn...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue:
How to identify and troubleshoot late migration of the ladder, marker, and sample peaks in data generated on the Agilent 2100 Bioanalyzer system.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
If communication between the 2100 Bioanalyzer and the PC cannot be established, or if an intermittent communication loss occurs, follow the instructions in...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
Instructions on how to import from or export data into LIMS software.
Steps to Follow
Data import
When importing sample names and sample comments from...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software version B.02.08 or later
Issue
When printing a report to PDF or HTML with the 2100 Expert software, the error "Failed to Generate Report" appears.
Background
This error...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue
Resetting upper or lower markers from their automatically assigned settings in the Agilent 2100 Expert software.
Background
The Agilent 2100 Expert software...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert Software
Issue
Samples with a broad signal such as NGS smears should be analyzed by setting up a region. Analyzing a region is also termed smear analysis.
Steps to Follow...