Hi danielchsny , Yes power spikes from unscheduled power interruptions can cause damage to sensitive electronic circuits. Another contributing factor is that when power is lost to the LC/MS running under high vacuum the rough pump will stop, causing a…
Hi Carol_Ultivo , There is always a trade-off or balance to be struck between Scan speed, mass resolution and sensitivity in any quadrupole mass filter. So, if you decrease the resolution and keep scan speeds the same you will naturally get an increase…
Yes - it was a bit of a mess - but I was able to fix it. Thanks for the heads up. Not everything could be fixed in the computer portion of the method. I had to go into the GC configuration and fix it there.
Thank you!
Thank you for the suggestions. Yes, some of what I'm doing does not require the ISTD but I leave it in the analysis method b/c of needing it in some of the work. I haven't had a chance to work on this in a couple of weeks, but will definitely keep it…
Hello Adrsto ,
I apologize for the delayed repsonse.
It is not possible to use the NIST algorithm itself within Unknowns Analysis. As you mentioned, you can adjust the forward and reverse settings and enable the Adjust Score option, which from the…
Hello Lstephan ,
I apologize for the delayed response.
Errors of this type generally point to an issue with a preferences file. The first thing to try is clearing these using the Restore User Settings tool found in the Quant Tools group in the start…
This Information Applies To: Agilent 4200 TapeStation 4150 TapeStation, TapeStation controller software
Issue
The system verification can be run to check the TapeStation performance, for example, when you suspect an instrument hardware fault.
...
This Information Applies To: Agilent 4200 and 4150 TapeStation software.
Issue
How to uninstall and reinstall the 4200 and 4150 TapeStation software.
Background
An uninstallation and reinstallation of the TapeStation software should be performed...
This Information Applies To: 2200 TapeStation instruments, 2200 TapeStation controller software
Issue:
The Agilent 2200 TapeStation controller software won't launch but displays the correct serial number in the top-right corner of the loading screen...
This Information Applies To: 4200, 4150 and 2200 TapeStation, TapeStation analysis software A02.02 or higher.
Issue:
When using the Agilent 4200, 4150 and 2200 TapeStation systems, the DV 200 of FFPE RNA samples can be calculated within the TapeStation...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, ProSize Data Analysis Software
Issue
How to export a ladder as a size calibration file and import it into a different run in ProSize.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
It is possible to set up the 2100 Expert software so that the files are automatically exported each time a chip run is complete.
Steps to Follow
To turn...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue:
How to identify and troubleshoot late migration of the ladder, marker, and sample peaks in data generated on the Agilent 2100 Bioanalyzer system.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
If communication between the 2100 Bioanalyzer and the PC cannot be established, or if an intermittent communication loss occurs, follow the instructions in...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
Instructions on how to import from or export data into LIMS software.
Steps to Follow
Data import
When importing sample names and sample comments from...