Good day. What is the best way of protection сystine during acid hydrolysis? I have used the most of preservatives such as: citric acid, phenol. decrease hydrolysis time. No one mentioned above give results. Also I am interested in tryptophan sample …
In that acqmeth.txt file...the column flow setpoints for both columns are set to "Off" ? Please make sure that both are checked ON and save the method.
They don't say the control type - Constant Flow is typical. What version of MassHunter Acquisition…
Hello,
The newer CDS 2.x software does not have that ability to run partial sequences into the same result set as Chemstation did in the past. Also, the new software does not have a single online session per instrument. If a second users needs to…
Hi James,
I am having sort of similar issue as nbrow12 has had 4 years ago. My system is a 7890A GC. I am getting PCM C flow shut down. I did a leak check around inlet, no leak was detected. I can not find out solution on my own. Please advise. Thanks…
The Digest of upcoming webinars has been updated as of July 8.
Notable additions include:
BioPharma (2)
Pharma (1)
Check Out:
Elemental Analysis in Yeast Cells and Microplastics by ICP-MS with Automated Micro-Flow Sample Introduction on…
Instrument tests were only part of Chemstation until version A.10.02 (ages ago). Tests, calibrations etc. are now run from the LabAdvisor software. Alternatively certain tests are available from the handheld controllers, such as the Instant Pilot G4208A…
This Information Applies To: Agilent 4200 TapeStation 4150 TapeStation, TapeStation controller software
Issue
The system verification can be run to check the TapeStation performance, for example, when you suspect an instrument hardware fault.
...
This Information Applies To: Agilent 4200 and 4150 TapeStation software.
Issue
How to uninstall and reinstall the 4200 and 4150 TapeStation software.
Background
An uninstallation and reinstallation of the TapeStation software should be performed...
This Information Applies To: 2200 TapeStation instruments, 2200 TapeStation controller software
Issue:
The Agilent 2200 TapeStation controller software won't launch but displays the correct serial number in the top-right corner of the loading screen...
This Information Applies To: 4200, 4150 and 2200 TapeStation, TapeStation analysis software A02.02 or higher.
Issue:
When using the Agilent 4200, 4150 and 2200 TapeStation systems, the DV 200 of FFPE RNA samples can be calculated within the TapeStation...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, ProSize Data Analysis Software
Issue
How to export a ladder as a size calibration file and import it into a different run in ProSize.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
It is possible to set up the 2100 Expert software so that the files are automatically exported each time a chip run is complete.
Steps to Follow
To turn...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue:
How to identify and troubleshoot late migration of the ladder, marker, and sample peaks in data generated on the Agilent 2100 Bioanalyzer system.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
If communication between the 2100 Bioanalyzer and the PC cannot be established, or if an intermittent communication loss occurs, follow the instructions in...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
Instructions on how to import from or export data into LIMS software.
Steps to Follow
Data import
When importing sample names and sample comments from...