Attend our second GC Live virtual event on Thursday, April 11 at 11:00 a.m. EST to learn about the extensive suite of troubleshooting and diagnostic tools that are built into Agilent intelligent GC systems. These can be accessed locally using the instrument…
Join our inaugural GC Live virtual event on Thursday, February 15 at 11:00 a.m. EST to learn how the intelligent features of Agilent 8890 and Intuvo 9000 GC systems can be used through their digital interfaces. An integrated touchscreen allows access…
The Digest of upcoming webinars has been updated as of February 6.
Notable additions include:
LC & LCMS (3)
OMICS (1)
Check Out:
Part 3: The Mining Lifecycle and Elemental Analysis Workshop Series on February 13
Acceptability and Antioxidant…
Hello,
You cannot store anything but numeric values in variables and aggregators for IR. You could create your own public array in custom code or a dll where you can store and recall the values as needed. A customer wanted to be able to display in…
Mike,
It is possible in later versions, but I think in 2.5 that may not be available. If you do not see it in the list, then it was not added to that version. You can use CC to back calculate the values from the compound amount, concentration, multiplier…
It was on the equipment, you can check to be sure by running a performance check on the chiller. Our chiller passed all points on the performance check but failed on the ICP system.
Hi Ajgor,
I am trying to something very similar to what you were doing with your 6890. I have been having some issues getting a response from the machine (using a HyperTerminal PuTTY) and was wondering if you had any tips for troubleshooting this. …
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Over time, the electrodes may become pitted or eroded and users may see a decrease in precision or begin to experience the "Tube fault" error when new tubes are installed. If...
This Information Applies To: Agilent GTA Furnace and Flame Instruments, Agilent 240FS/240GFAA/GTA120/PSD120
Issue
There may be occasions when users need to remove GTA furnace center block workhead (instruments with both Flame and Furnace capabilities...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
The shroud should be replaced annually, or when there is evidence of damage caused by mechanical shock or contamination from liquid spillage.
Items Required
Shroud Removal...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Before replacing the electrodes and/or shroud, the GTA Furnace workhead will need to be disassembled. After replacing the electrodes and shroud, the GTA Furnace workhead will...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer
Issue
After starting a run, the run is aborted with the following error: Current = 0.0uA, Expected range: 5 - 3000.
Steps to Follow
Check...
This Information Applies To: Agilent OpenLab CDS 2.x in file system configuration
Issue
Sometimes, you will need to change the Projects Root Path / Project Storage Path . This article outlines the procedure on how to change it.
Background
...
This Information Applies To: 5000 series ICP-OES (5100,5110,5800,5900), AVS 4/6/7
Issue
Steps to bypass the AVS to troubleshoot poor performance on the ICP-OES
Tip : These steps should be completed after the Subsystem Communication...
This Information Applies To: Agilent 8890/8860 GC Systems with SSL, MMI, PTV, or VI inlets.
Issue
Split vent trap replacement is recommended as part of the scheduled preventive maintenance. Sometimes, it has to be replaced when the inlet pressure...
This Information Applies To: Agilent 6000 Series LC/MS systems equipped with MS40+ rotary vane pumps
Issue
Instructions on how to replace the filter in an Agilent MS 40+ pump as part of annual pump maintenance
Background
The filter in the...
This Information Applies To: Agilent ICP-OES 5000 Series (5100/5110/5800/5900) with ICP Expert 7.5.x Software
Issue
The Recommended Routine Maintenance Schedule does not adjust for the number of samples analyses or the sample matrix, both of which...