I have configured my laptop to our 8890 GC with a split/splitless inlet and FID. I am currently just doing manual injection. When sending the method from my laptop to the instrument, all of the parameters reach the setpoints except for my column temperature…
I have a GC 6850 with an FID. I'll have to upgrade to Windows 10 soon, because Windows will no longer provide security updates for Windows 7. If I upgrade my computer to Windows 10, is there a ChemStation version that's compatible with the 6850 and Windows…
Hello Agilent Community Our Zero Air / Nitrogen generator from Parker Balston broke down and it has been discontinued. The supplier does not offer replacement parts and they do not longer have a gas generator model with the combination Air/Nitrogen. Therefore…
First off, it is not the barcode reading that causes the vial leaking, but my best guess is that the barcode reading introduces a variable time, that then can cause a scheduling conflict. This scheduling conflict is then not handled, and the 7697A is…
Hi, My method for 6890 GC/FID has a warning message that there are overlapping integrations for some of the compounds, I would like to correct this but unsure how, I know the answer lies in the integration events table. Any help is appreciated!
After a failed methamphetamine quantitation, it was noticed that the methamphetamine peak shape on our GC/FID instruments has been consistently poor or deteriorating through out a run. This has been happening on both of our GC/FID instruments (all 3 columns…
Hi dmarchini, I have attached a guide for some recommended spares. The questions of cost to maintain any GC is a difficult one as the application and sample amount plays a major role. Replacement of the consumables will vary because of this. The guard…
GC and GCMS Supplies Recommendations for POIS 2020.pdf
Hope your week is going well, can wait for spring to actually arrive.
When we turn auto offset on for either of our GCs, it ramps the output so high that it shuts down. This is just for the nitrogen phosphorus detector. We normally turn it off, but…
Thank you Abbey for your response. I am still puzzled as to why I see no signal while in the splitless mode. I do obtain signals and chromatograms when operating in split mode. The liner is a 5190-3162 Blank is ethanol (pure) sampling via A/S Been having…
Hello the area amount of the starndard is the one you expected? I don't see much difference between the blank and the std run, its seems like the FID is working but there is a leak somewhere, maybe in the injector? No solvent peak?
This Information Applies To: Agilent ICP Expert software.
Issue
The software version is often asked and is a valuable information: to see if any updates are needed, if certain options are available etc.
Steps to Follow
Launch ICP Expert...
This Information Applies To: Agilent OpenLab CDS
Issue
This article provides step-by-step instructions to calculate peak-to-valley ratio in OpenLab CDS.
Background
The peak-to-valley ratio is calculated to indicate the quality of peak separation...
This Information Applies To: Agilent 6500 Series Q-TOF LC/MS systems, MassHunter Workstation 10.1 or below and MassHunter Workstation 11.0 .
Issue
Fully reset the Q-TOF LC/MS system via a power cycle without venting. For users who experience slow...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, and Oligo Pro II systems
Issue
The volume of sample used by Agilent parallel capillary electrophoresis systems during a run.
Resolution
The...
This Information Applies To: Agilent 2100 Expert software, 2100 Expert Security Pack, 2100 Bioanalyzer
Issue
When opening the 2100 Expert software and using the Security Pack, the error message " Start of launcher application failed - The requested...
This Information Applies To: Agilent 6890, 6850, 7890, 8890, 8860, Intuvo 9000 GC systems.
Issue
The exchange of the ignitor in a Flame Photometric Detector (FPD) may be required in the following scenarios:
Preventive or periodic maintenance...
This Information Applies To: Agilent 1290 Infinity Quaternary Pump G4204A, 1290 Infinity II Flexible Pumps G7104A/C, and G7131A/C.
Issue
If the flexible/quaternary pump does not generate flow or build up pressure, it could be due to a stuck inlet...
This Information Applies To: Agilent 5200, 5300 and 5400 Fragment Analyzer systems
Issue
Separation times for the Fragment Analyzer for each array format and kit.
Resolution
Caution : The times in this article are the length of time...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, Oligo Pro II, ProteoAnalyzer systems
Issue
Guidance for installing the Agilent parallel capillary electrophoresis instrument controller and/or...
This Information Applies To: OpenLab CDS (version 2.x) system
Issue:
This article explains how to export OpenLab CDS 2.x data as Archived file.
For copying OpenLab CDS 2.x data to another Projects or another OpenLab CDS systems, you can use data...