PFTBA Solution Top Up in 5977B MSD

Top Replies

• 

  kristen.sensabaugh over 1 year ago +1
  Hi Lee-Anne let us know if the information (Step 2 and Figure 1 Video) contained in this article helps: Refilling the EI Calibration Vial for the Agilent 5975 and 5977 Series GC/MSD Cheers, Kriste…
• 

  Agilent over 1 year ago in reply to garyb007 +1 suggested
  Hi all, garyb007 is correct. As long as you are not scanning with the MSD, you can replace PFTBA and then follow the procedure to purge the cal valve.