I'm using the GC6890 with one single column (CP7429). The gas products have to be analyzed by TCD and FID simutaneously. How should I connect the column to TCD and FID? Is it necessary to have a s plitter to split effluent from a single column to TCD…
Lately, we are having major issues with Masshunter failing on injections. I put a table listing our operating systems and the masshunter versions installed. The error we are getting is : MSQQQ_1:Failed to write scan record to the data file . We are writing…
Hi shaneo did you solve the problem? I am having the same issue now and I am wondering if you could solved it and can help me what you did. Thanks in advance.
Situation: When launching an installation of OpenLab Chemstation C.01.07, the 'Connection to selected server failed' error appeared. Agilent OpenLab Shared Services service was not started, and attempting to manually start the service yielded the following…
I recently had this issue, even with methods that had worked previously. It became apparent that this was happening at a particular temperature and once that temperature was reached, the inlet would shutdown and the error would pop-up. It became apparent…
I got a rare error after re-installing MassHunter Acquisition B 06.01. This error made all my Acquisition analysis methods unable to read. Note: The reason why I re-installed MassHunter Acquisition B06.01 was the software was doing some wired things;…
If cartridge does not eject after assay has completed, this document can be used to help troubleshoot. Here is a list of the most common causes for this error: User improperly loaded cartridge/cell plate User loaded two cartridges into instrument at once…
Hi, I have an old Agilent 1120 compact system running on a computer with ChemStation B. 04.03, last week the computer failed and never got back, I reinstalled the ChemStation software using the Disk provided at the time of purchase, but don't have the…
This Information Applies To: Agilent 8890/8860 GC Systems
Issue
Early Maintenance Feedback is a useful feature on Agilent GC Systems and software that allows a user to monitor the maintenance needed on their GC. This feature allows for users to...
This Information Applies To: Agilent 8890/8860 GC Systems
Issue:
This procedure outlines the steps to view and clear the maintenance warnings on based on Agilent 8890/8860 GCs. You can also follow the onscreen instructions to perform maintenance...
This Information Applies To: Agilent 6000 Series LC/MS systems equipped with Agilent MS-40+ rotary vane pump.
Issue
Regular check of the rough pump fluid level in your MS40+ pump as part of regular 6000 LC/MS system maintenance checks.
Steps...
This Information Applies To the Following Products : All Agilent iFunnel and Agilent Jet Stream (AJS) 6400 Series LC/MS triple quadrupole systems, Agilent 6460A/C, 6470A, 6490A, and 6495A/B/C
Issue:
As LC Triple Quadrupole Mass Spectrometers (LC...