Okay, I just remembered - I didn't manage to change the size of the text in this program, it was in the Qualitative analysis program. So perhaps it is not possible to change the text size in this program. I really wish that feature would be added, for…
Hello Chalbrecht ,
I apologize for the delayed response.
There are a few options for naming the reporting output file using the sample or batch name with $(SampleName) and $(BatchFileName), but I don't see that the Sample Group is an option. You may…
Hello Achim_Hongenaert ,
I apologize for the delayed response.
There are a few outliers that can be used for recovery calculations. If this compound is added to all samples then I believe the best option will be to call it a Surrogate in quant, even…
Thank you, Linh, for your information. Given that it is an old machine, I am concerned about the potential loss of data if we upgrade the software. Instead, I will create a shutdown method to be executed at the end of the sequence run.
Hello,
I would like to ask if it is possible to execute the command "Created Compound from Each Selected Spectrum" in version B.10.0 of the Agilent MassHunter Qualitative Analysis software. This command is available in version B.07.00, but not in version…
Did you remove the diffusion pump, take it apart, empty the contents completely, wash them all with something like toluene, reassemble it with new diffusion pump fluid filled only to the top of the "cold" mark - if you didn't take it all apart and any…
Hello. Thank you howard_sanford for that answer! I talked to an Agilent technical representative and he came up with the same solution. But, we have the B.07.06.2704 version of Masshunter. What would be the data path for those files in that case? I am…
Dear juju,
Sorry to tell you, that single UV spectra extraction at a certain wavelength for each peak is not feasible within bio-SEC Software.
B rgds,
Anne
Hi,
Unfortunately, I cannot clarify the error message and the cause in this forum, so I would ask you to contact your responsible customer support. A ticket can then be opened with a detailed description including the log files so that the software…
This Information Applies To: Agilent 8890/8860 GC Systems
Issue
Early Maintenance Feedback is a useful feature on Agilent GC Systems and software that allows a user to monitor the maintenance needed on their GC. This feature allows for users to...
This Information Applies To: Agilent 8890/8860 GC Systems
Issue:
This procedure outlines the steps to view and clear the maintenance warnings on based on Agilent 8890/8860 GCs. You can also follow the onscreen instructions to perform maintenance...
This Information Applies To: Agilent 6000 Series LC/MS systems equipped with Agilent MS-40+ rotary vane pump.
Issue
Regular check of the rough pump fluid level in your MS40+ pump as part of regular 6000 LC/MS system maintenance checks.
Steps...
This Information Applies To the Following Products : All Agilent iFunnel and Agilent Jet Stream (AJS) 6400 Series LC/MS triple quadrupole systems, Agilent 6460A/C, 6470A, 6490A, and 6495A/B/C
Issue:
As LC Triple Quadrupole Mass Spectrometers (LC...